Mountain
1 | Mountain Track |
|
Assembly and Setup
Upper Ramp
Lower Ramp
2 | Trestle | 3 |
|
•Fit the mountain onto the bridge track. Push to “snap” in place.
•At an angle, fi t the tab on a trestle into the slot on the mountain. Push to “snap” in place.
•Repeat this procedure to assemble the other trestle to the mountain.
•Fit the tabs on the upper ramp into the slots in the lower ramp.
•Insert two screws into the upper ramp. Tighten the screws with a Phillips screwdriver. Do not
•Repeat this procedure to assemble the other upper and lower ramps.
4
•Track pieces easily snap together.
•Place the vehicle on the track.
•Long straight track pieces sold separately and subject to availability.
Hint: We do not recommend using the engine on carpets. For best performance, use on the track provided or hard, flat surfaces.
• Push down on Sherriff to hear fun phrases!
5 | 6 |