ASSEMBLY
8 | Toys | Canopy |
| ||
|
| Fasteners |
Pad
Fastener 
•Fasten the pad fasteners to the base fasteners.
•Lift the canopy.
•Attach the toys to the canopy fasteners.
IMPORTANT! Assembly is now complete, but Bounce ‘n Play Activity Dome is not ready for use. Please refer to the Use instructions, on this page, beginning with step 2.
USE
To Unfold
1
Sides of Base Wire
•Position the product upright on a flat surface.
•Grasp both sides of a base wire.
•Pull both sides of the base wire outward and then let the base wire rotate down.
Note: If the base wire does not freely rotate down, pull the sides of the base wire further outward.
2
| Frame |
Groove | Groove |
Sides of Base Wire
•Lift the product up slightly so that each side of the base wire “snaps” into the groove in each frame. Make sure you hear a “snap”.
6