Specifications, Installation | AMX DAS-MET-6SRC instruction

Installation Guide

DAS-MET-6SRCMetreau™ 6-Source Audio Keypad

Overview

The DAS-MET-6SRC Metreau 6-Source Audio Keypad (FG1122-01) features source control, a navigation wheel that adjusts volume and provides up, down, left, right and center button options, as well as an LED bar for visual volume feedback (FIG. 1).

6pre-printed pushbuttons (with blue LED indicators)

IR Sensor located here

Volume Level

Indicator LED

Navigation Wheel & pushbuttons

FIG. 1 DAS-MET-6SRC Metreau 6-Source Audio Keypad

The DAS-MET-6SRC is a SWT keypad, suitable for use in Matrix Distributed Audio Systems.

Specifications

DAS-MET-6SRC Specifications

Power:	12 VDC, 125 mA

Front Panel	• Pushbuttons - 6 tactile pushbuttons with blue LED indicators
Components:	that illuminate when the source is selected, and stay lit until the
	source is turned off. These pre-printed buttons are field-
	replaceable.
	• IR Sensor - Works specifically with the MIO-R1-AUDIO remote
	controller (38 kHz only).
	• LED Levels Indicator - set of 7 blue LEDs provide volume level
	feedback.
	• Navigation Wheel - consists of 5 pushbuttons: 4 directional
	pushbuttons (Up, Down, Right, Left), 1 center pushbutton, and
	bi-directional rotating wheel for volume adjustments.
	Note that the center pushbutton is dual-purpose: a push/release
	provides one function, while a press/hold provides another.

Rear Panel	Wiring connection - Two 4-pin SWT connectors that provide con-
Components:	nection from the Matrix Audio Controller, and to the speakers.

Dimensions	• Keypad and Mounting Plate: 4.055" x 1.772" x 0.997"
(HWD):	(103mm x 45mm x 25.32mm)
	• Mounts into standard decora-style wall plates.

Weight:	2.4 oz. (68.04 g)

Operating	• Operating Temperature: 32° - 104° F (0°- 40° C).
Environment:	• Relative Humidity: 5% - 85%, non-condensing.
	• Intended for indoor use only.

Certifications:	• FCC Class B
	• CE
	• IEC60950
	• RoHS

Colors:	• White (FG1122-01-WH)
	• Black (FG1122-01-BL)
	• Light Almond (FG1122-01-LA)

Optional	• Single Button Kit (FG5794-10)
Accessories:	• Lutron Cairo Wallplates (available in a variety of sizes and
	colors)

Navigation Wheel - Pushbuttons

The top, bottom, left and right points on the Navigation Wheel are used for source control and can be programmed to provide any source functionality by learning the applicable IR code.

The center pushbutton is dual-purpose: a push/release on this button provides one function, while a press/hold provides another. The center pushbutton are also used for source control and can be programmed to provide any source functionality (again, by learning the applicable IR code).

FIG. 2 shows the button layout of the Navigation Wheel:

Rotate wheel	Top center pushbutton = Nav UP
	Top center pushbutton = Nav UP


counter-clockwise to	Rotate wheel clockwise
adjust Volume Down	to adjust Volume Up
Left center			Right center
Left center			Right center
pushbutton =			pushbutton =
Nav LEFT			Nav RIGHT
		Center pushbutton =
		Nav Center
		Nav Center
	Bottom center pushbutton = Nav DOWN
	Bottom center pushbutton = Nav DOWN

FIG. 2 Navigation Wheel - button layout

Navigation Wheel

The Navigation Wheel itself can be rotated bi-directionally, and provides volume level control.

•Clockwise rotation increases the volume level, counter-clockwise rotation decreases the volume level.

•The range for volume is 0 - 70.

Installation

Note: Before touching the device, discharge the static electricity from your body by touching a grounded metal object.

FIG. 3 shows the basic rear components of the DAS-MET-6SRC keypads:

Mounting plate

14-pin connector (To DAS-MET-NUM)

not used

SWT connector (To speakers)

SWT connector (from Matrix Controller)

FIG. 3 DAS-MET-6SRC - Rear Components

Wiring

SWT wiring utilizes four-color "snap connectors" to secure the wires (no screws). You will need a wire stripper to prepare and connect the captive wires.

1.Strip 0.25 inch (6.35 mm) of wire insulation off all wires.

2.Insert each wire into the appropriate opening on the connector according to the wiring diagrams and connector types described in this section.

SWT Data and Power Connections

SWT wiring involves connecting the Mi-Series Controller, Metreau keypads, and Speakers.

The Matrix Audio Controller and Metreau keypads are cabled using standard

4-conductor speaker cable originating at the Controller, passing through the keypad, and terminating at the speaker location.

AMX recommends using a bundled 4-conductor, 16-gauge stranded copper wire in a single continuous run.

DAS-MET-6SRC specifications

The AMX DAS-MET-6SRC is an advanced data acquisition system that stands out for its robustness and versatility in various industries. Designed to address complex monitoring and control applications, this system integrates state-of-the-art technologies and features that enhance its performance and usability.

At the heart of the DAS-MET-6SRC is its modular architecture, which allows for easy customization and scalability. Users can select from a variety of input modules, supporting different sensor types, including temperature, pressure, and voltage. This configurability enables the system to adapt seamlessly to specific project requirements, making it a preferred choice for engineers and project managers.

One of the key features of the AMX DAS-MET-6SRC is its high-speed data sampling capability. With a sampling rate that can reach up to 1 kHz, the system ensures accurate and real-time data collection from various sources. This is crucial in environments where quick decision-making is essential, such as in process automation, environmental monitoring, and industrial applications.

Moreover, the DAS-MET-6SRC is equipped with advanced signal processing technologies. These include noise filtering and signal conditioning, which enhance the reliability of the data collected. This ensures that the system can operate effectively even in challenging environments, where external factors may otherwise interfere with data accuracy.

In addition to its data acquisition capabilities, the AMX DAS-MET-6SRC features powerful communication options. It supports multiple communication protocols, including Ethernet, RS-232, and Modbus, allowing for easy integration into existing systems and networks. This flexibility facilitates remote monitoring and control, giving users the ability to manage their operations from virtually anywhere.

The system is designed with user-friendliness in mind. It includes a graphical user interface that simplifies the configuration process and data visualization. Users can easily set up the system, monitor real-time data, and generate reports without extensive training or experience.

Finally, the AMX DAS-MET-6SRC is built with durability in mind. Its rugged design makes it suitable for use in industrial settings where exposure to harsh conditions is common. With a focus on reliability and performance, this data acquisition system is an excellent choice for professionals looking to enhance their monitoring and control capabilities. Overall, the AMX DAS-MET-6SRC stands out as a comprehensive solution for a wide range of applications, delivering high performance and exceptional versatility.