Mounting Procedures, Programming | AMX DAS-MET-6SRC specification

1.Connect the Matrix Controller’s Zone Output connector to the 4-pin connector on the rear panel of the Metreau keypad labeled TO CONTROLLER for data and 12 VDC power.

2.Connect the other 4-pin connector on the keypad labeled TO SPEAKERS to the SWT speakers as shown in FIG. 4.

Mounting Procedures

AMX recommends mounting Metreau keypads in standard U.S.-style decora wallboxes:

•Conduit box should meet NEC specs (section 370)

•Minimum internal clearance of (HWD) 2-5/8" x 1-3/4" x 1-5/8".

Note: Before touching the device, discharge the static electricity from your body by touching a grounded metal object.

Wallbox Mounting

Speakers

R+	TOSPEAKERS	TOCONTROLLER	R
R-	TOSPEAKERS	TOCONTROLLER	G
R-			G
L-			D
L+			L

SWT connectors on

Metreau keypad

Mi-Series Controller

Delta Series Controller

Carbon XA Series Amp

1.Use the cutout dimension for the wallbox to cutout the install surface.

2.Connect the SWT cable connector to the rear of the keypad.

3.Place the Mounting Plate on the wallbox; align the screw holes with the mount- ing holes and fasten the Mounting Plate to the wallbox using the screws sup- plied.

Note: Do not overtighten the screws when mounting the Mounting Frame. The device should be flush with mounting surface.

Mounting Dimensions

FIG. 6 provides detailed dimensions for the 6-button/Navigation Wheel Metreau keypads.

FIG. 4 SWT wiring

NOTE: If you connect a keypad while the controller is on you must restart the controller for that keypad to become active.

Source Power Handling:

The Matrix Audio Controller learns the IR commands for power on/off during the programming setup. Source components are turned on when they are selected on the keypad. The source remains on until it has been idle in all zones for a duration of 10 minutes. The source is then turned off until selected again.

Tango System Integration Drawing - Using 4-Conductor Speaker Wire

IR OUT

LINE IN

Tango

Controller

Shared 4-conductor speaker wire

FIG. 5 System Integration Drawing Using 4-Conductor Speaker WireFIG. 6 Mounting Dimensions - DAS-MET-6SRC

Programming

SWT-only Metreau keypads (DAS-MET-6SRC and DAS-MET-NUM) are configured via the Tango Audio Controller. Refer to the Tango Audio Controllers Operation / Reference Guide for details.

Additional Documentation

Refer to the Metreau Keypads Operation/Reference Guide (available online www.amx.com) for additional information on configuration, programming and using the Metreau keypads.

For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).	93-1122-01	REV: A

1/08

AMX reserves the right to alter specifications without notice at any time.

3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993 • www.amx.com

DAS-MET-6SRC specifications

The AMX DAS-MET-6SRC is an advanced data acquisition system that stands out for its robustness and versatility in various industries. Designed to address complex monitoring and control applications, this system integrates state-of-the-art technologies and features that enhance its performance and usability.

At the heart of the DAS-MET-6SRC is its modular architecture, which allows for easy customization and scalability. Users can select from a variety of input modules, supporting different sensor types, including temperature, pressure, and voltage. This configurability enables the system to adapt seamlessly to specific project requirements, making it a preferred choice for engineers and project managers.

One of the key features of the AMX DAS-MET-6SRC is its high-speed data sampling capability. With a sampling rate that can reach up to 1 kHz, the system ensures accurate and real-time data collection from various sources. This is crucial in environments where quick decision-making is essential, such as in process automation, environmental monitoring, and industrial applications.

Moreover, the DAS-MET-6SRC is equipped with advanced signal processing technologies. These include noise filtering and signal conditioning, which enhance the reliability of the data collected. This ensures that the system can operate effectively even in challenging environments, where external factors may otherwise interfere with data accuracy.

In addition to its data acquisition capabilities, the AMX DAS-MET-6SRC features powerful communication options. It supports multiple communication protocols, including Ethernet, RS-232, and Modbus, allowing for easy integration into existing systems and networks. This flexibility facilitates remote monitoring and control, giving users the ability to manage their operations from virtually anywhere.

The system is designed with user-friendliness in mind. It includes a graphical user interface that simplifies the configuration process and data visualization. Users can easily set up the system, monitor real-time data, and generate reports without extensive training or experience.

Finally, the AMX DAS-MET-6SRC is built with durability in mind. Its rugged design makes it suitable for use in industrial settings where exposure to harsh conditions is common. With a focus on reliability and performance, this data acquisition system is an excellent choice for professionals looking to enhance their monitoring and control capabilities. Overall, the AMX DAS-MET-6SRC stands out as a comprehensive solution for a wide range of applications, delivering high performance and exceptional versatility.