Mode I - Beginner Driver
Let’s Go
Reset Switch
ON/OFF
Button
•Locate the reset switch on the back of the control tower.
•Slide the reset switch ON 
.
•Locate the ON/OFF button on the front of the control tower.
•Press the ON/OFF button to turn the track and the control tower on. The button lights up if the track is properly connected!
Hint: If the car has not driven past the control tower in a few minutes, the control tower turns off automatically and the control tower button light goes out. Press the ON/OFF button again for power in the control tower and track.
Mode Switch
On/Off
Button
Speed Control Switch
•Slide the mode switch on top of the car to I for beginner driver mode.
•Locate the speed control switch on the bottom of the car.
•Slide the switch to either slow
speed 
or fast speed
.
Hint: We recommend slow speed for first time drivers.
•Press the ON/OFF button on top of the car to turn the car on. The car button lights up. The car is now ready to receive a signal from the remote controller.
Hint: If the car has not been driven for a few minutes, it turns off automatically. Press the ON/OFF button again for power in the car.
12