Fisher-Price 77306 instruction sheet Wheel Reset Switch

Page 15

Mode II - Pro Driver

Wheel

Reset Switch

ON/OFF

Button

Turn the control tower power on to hear sound effects each time the car drives over the starting ramp.

Be sure the reset switch on the control tower is set to the on position .

Press the ON/OFF button on the front of the control tower to turn power on. While power is on, the button will not light because the track is not connected to the control tower in this mode.

Hint: If the car hasn’t driven past the control tower for a few minutes, the tower turns off automatically. Press the ON/OFF button again for power.

Forward

Reverse

Press the forward button on the remote controller.The car moves forward.

Press the reverse button on the remote controller. The car moves backward.

Use the wheel on the remote controller to maneuver around the track or past obstacles.

Note: The range of the remote controller to the car is 15 feet (with no obstructions).

15

Image 15
Contents Grow With Me RC Rally Parts Control Tower Car Battery InstallationRemote Controller Battery Tips When To Replace BatteriesAssembly Assembly Ramp Tabs Peg Hole Rail Assembly Label Decoration Setting Up The Track Mode I Beginner DriverRing of Fire Ramp Crash Gate Flag Stadium Light Dirt Track Hint We recommend slow speed for first time drivers Let’s GoModeBatteryI BeginnerInstallationDriver Mode II Pro Driver Wheel Reset Switch Storage Fit the dirt track to the crash gate as shown StorageCare Symptom Solution Troubleshooting GuideThere are no sound Car keeps sliding One 1 Year Limited Warranty FCC Note United States Only Questions? Wed like to hear from you Consumer Information
Related manuals
Manual 24 pages 11.13 Kb