Stage 3 - Stand & Play Piano 
If you have not used this toy before, and are assembling it for
1 | To change from Stage 2 to Stage 3 | |
• Turn the threaded knobs | ||
| ||
| assemblies from the keyboard. | |
|
•Press the star buttons and remove the two supports from the legs. Now, proceed to step 2.
Star Button |
Leg |
Support |
Large Slot |
2 |
•While pressing the star buttons on a support, fit the end of the support into the large slot in one of the legs, as shown. Push the support until it “snaps” into place.
•Repeat this procedure to attach the other support to the remaining leg.
| Knob |
| Leg Assembly |
3 | Leg Assembly |
|
•Position the keyboard so it faces up.
•Fit a leg assembly to the side of the keyboard, as shown.
•Turn the knob clockwise to secure the leg assembly to the keyboard. Make sure the knob is fully tightened.
•Repeat this procedure to attach the other leg assembly to the keyboard.
Stage Switch | Mode Switch |
•Slide the stage switch to 
for use with standing toddlers.
•Slide the mode switch to 
. Press the keys to play note by note like a real piano, as stars light up.
• Slide the mode switch to 
. Press the keys to hear notes that sound like they’re sung by a children’s chorus.
•Locate the volume switch on the bottom of the keyboard. Adjust volume to high 
; or low 
, for your child’s comfort.
Hint: If your child is not actively playing with this toy, it turns off automatically (sleep mode).
• Be sure to slide the stage switch to the off O position when not in use.
Tab |
Hanger |
4 |
• Rotate the hangers up and “snap” them into place.
• Attach the toys to the hangers and tabs as shown. | 6 |