Lumex Syatems 565TG, 565DG Correct Tilt Positioning For TILT-IN-SPACE, Legrest Operation

Release Lever

Under Cusion

Push Handle

Up Position

CORRECT TILT POSITIONING

FOR TILT-IN-SPACE

NOTE: The Tilt chair is attendant operated only. For chair to operate properly, a person must be in the chair.

To tilt the chair back:

1.Stand behind the chair, and locate the release lever under the push handle.

2.Squeeze the lever while pushing down on the back. Once the desired position is attained, release the lever to lock into position

(See fig. 16).

To bring the chair up:

1.Stand behind the chair, and locate the release lever under the push handle.

2.Squeeze the release lever and lift the back up. Once the desired position is attained, release the lever to lock into position (See fig. 16).

Legrest Up

Figure 16

	LEGREST OPERATION
	FOR TILT-IN-SPACE
	To lift legrest:
Legrest Down
	Step on the front of the foot pedal, located on the
	side of the chair, until it locks in place (See fig. 16).
	To lower legrest:
	Step on the back of the foot pedal.
	Note: The legrest is easier to operate when the
	chair is in its fully tilted position, however
	legrest will operate in any position of tilt.

10 565DG/565TG Ortho-Biotic Preferred Care® Recliners Operating Instructions