9.Place chair in the upright position.
10.Close the footrest.
NOTE: If binding or pinching of footrest guard occurs, call Invacare at the number listed below.
11.Carefully tip recliner onto the left side. Be sure there are no obstructions on or around the floor before doing this.
12.Repeat STEPS
| SIDE VIEW |
|
REAR OF |
| FRONT OF |
CHAIR | Seat Cushion | CHAIR |
|
| Side Frame |
DO NOT |
| Footrest |
|
| |
remove this bolt |
|
|
Bolt A | Bolt B Bolt C Bolt D | Scissor Mechanism Guard |
|
NOTE: Some detail removed for clarity.
FIGURE 3 - INSTALLING THE SCISSOR MECHANISM GUARD
Invacare Corporation | www.invacare.com |
|
|
USA |
|
One Invacare Way | Invacare is a registered trademark of |
Elyria, Ohio USA | Invacare Corporation. |
Yes, you can. is a trademark of Invacare | |
Corporation. | |
| © 2002 Invacare Corporation |
| Part No. 1109697 Rev B - 7/02 |