Using the Restraint

Secure Your Child in the Restraint

1.To loosen the harness, lift the adjuster lever located in front of the restraint and pull the harness straps forward (Fig. 1).

2. To unfasten chest clip, squeeze tabs (Fig. 2). Separate clip (Fig. 3).

4. Place child in the restraint. Position the harness straps around the child and fasten the child restraint buckle (Fig. 5). Fasten chest clip . (Fig. 6).

5. Gently pull up on the harness straps to tighten the lap section of the harness.

6. Slowly pull the adjuster strap to tighten the
harness around the child (Fig. 7).	5	6

IMPORTANT!Harness should have a snug, but comfortable, fit around the child.

7. Position the chest clip at the middle of the child’s chest, level with the child’s armpits (Fig. 7).

8. Check harness height (see page 12).

9. Verify that harness is not twisted and child is properly secured.

3.To unfasten buckle, use thumb to press release

button, then remove tongues from buckle (Fig. 4).

		IMPORTANT!	Always pull on the harness after
		securing the child to make sure the buckle and
2	3	harness are locked. If they are not, the buckle or
		adjuster area may be clogged with food, drink,
		or objects that need to be removed. See pages
		35 –37 for cleaning instructions.
		IMPORTANT!Always make sure that the
		harness is tight before each use, or after any
		adjustments.