Section 7 - Installation and Use
CRS Connector LATCH Anchor
Points- 7.3
1. | Consult your automobile’s owners |
| manual or manufacturer for location |
| and availability of LATCH lower |
| anchor points. |
2 - | Remove BOTH LATCH Lower |
| Anchor connectorc from the LATCH |
| Lower Anchor storage compartment. |
3- Attach the right and left LATCH
Lower Anchor to the anchor points. Press down on the base with your
knee and pull up on the webbing loop until the webbing is taut.
4-
5-
19
CHECK level indicator to ensure the ball is in the green area. Pull out on
the yellow release knob and slide the anglefoot to raise the base or to lower the base angle.
CHECK base for movement at
the belt path. Base should not move more than 1 inch in any direction.
If base moves, repeat steps until all safety steps are met.