The First Years I440 manual Yes

Page 13

Section 6 - Selecting A Vehicle Seating Location

5. Vehicle Seat Belt Systems:

Use only the vehicle’s lap and shoulder belt, lap belt or LATCH system when restraining this Infant Seat.

Design and operation of vehicle seat belt systems vary from vehicle to vehicle and from seating location to seating

in the same vehicle. Not all vehicle seat belts betls can be used with a child restraint. Refer to the information in this section information on the various types of vehicle seat belt systems.

LAP SHOULDER BELTS

Combination lap-shoulder belt with locking latch plate

This type of belt system has a latch plate that will not allow the lap portion of the belt to loosen once it is buckled. The belt is tightend by pulling hard on the shoulder portion of the vehiclebelt while pushing down on the restraint.

YES

Lap Belt Only

YES

Lap and

Shoulder Belt

Combination lap-shoulder belt with sliding latch plate

This type of belt system has a latch plate that allows the belt to slide through even when it is buckled. Many vehicles with this type of seat belt system can be

locked by pulling all the seat belt webbing out. Refer to your vehicle owner’s manual for details on switching the retractor from

ELR mode to ALR mode.The belt is tightend by pulling hard on the shoulder portion of the vehicle belt while pushing down on the restraint.

12

Image 13
Contents Death or Serious Injury can occur Introduction Table Of Contents Table Of Contents Death or Serious Injury can occur Death or Serious Injury can occur Use Recommendations Infant Seat Parts Infant Seat Parts Position equipped Selecting a Vehicle Seating LocationFirst Years Policy Statement Selecting a Vehicle Seating Location YES Lap belt with automatic locking retractorALR Unsafe Vehicle Seat Belt Systems Death or Serious Injury can occur Leveling base Base InstallationAuto Belt Base Installation with Lap Belt Installation and Use  Anchor points CRS Connector Latch Anchor PointsCRS Locking Clip Installation Installing Carrier onto the Base This carrier must always be used with the base CRS Installation PictogramsInfant Seat and Base installed with Lap belt Check That Handle is Locked HandleGrip red handle and gently pull up I440 Removal from baseHarness System Chest ClipPoint Buckle Harness. System Harness AdjusterShoulder Height Adjustment Canopy Installation and UsePositioning/Removal The Head Bolster is held in place Head BolsterPad Removal Pad Installation Safety Checklist/Safe Practices Safety Checklist/Safe Practices Additional Information Care and Cleaning Blank Learning Curve Brands 4000000609 02

I440 specifications

The First Years I440 is an innovative product that has captured the attention of parents and caregivers alike. Designed with a focus on safety and functionality, it combines advanced technology with user-friendly features, making it an ideal choice for modern families.

One of the standout features of the I440 is its state-of-the-art safety mechanisms. It meets and often exceeds the rigorous safety standards set by regulatory bodies. The I440 is equipped with a five-point harness system that ensures that children are securely fastened and protected during travel. Additionally, it has side-impact protection, which is crucial in safeguarding young passengers in the event of a collision.

The I440 is designed for versatility and convenience. It utilizes a modular design, allowing parents to easily transition the seat from a rear-facing position for infants to a forward-facing configuration for older children. This adaptability ensures that the I440 can grow alongside your child, making it a long-lasting investment.

Comfort is another key characteristic of the I440. The seat features plush padding and a breathable fabric that keeps children comfortable during longer journeys. The ergonomic design is not only conducive to a cozy seating experience, but it also supports proper posture for growing children.

In terms of technology, the First Years I440 includes features that enhance usability. An adjustable headrest can accommodate a child's growth, while the one-hand recline system allows for quick adjustments on-the-go. This ensures that the seat can be positioned for maximum comfort, whether the child is awake or asleep.

Another innovative aspect of the I440 is its easy installation process. It comes with clear instructions and is compatible with various vehicle types, making it straightforward for parents to secure the car seat safely in place. Furthermore, it includes an integrated level indicator that assists with proper angle adjustments, minimizing the risk of installation errors.

Durability is a priority with the First Years I440, as it is constructed with high-quality materials designed to withstand daily use. Its removable and washable covers make upkeep a breeze, ensuring the seat remains clean and presentable over time.

In summary, the First Years I440 stands out as a top-tier car seat, combining safety, comfort, and ease of use. Its advanced features and thoughtful design make it a reliable choice for parents seeking a product that will protect their precious cargo while providing convenience for their busy lifestyles.