Grasp the baby chair and fix it to the frame pushing with both hands till it clicks.
6• The baby chair handlebar can be adjusted to four heights and can be lowered pushing the two buttons on the sides.
7• Inside the car the handlebar must be fully lowered, as shown in the figure.
8• Grasp again the car safety belt and pull it behind the backrest.
9• Insert the belt into the catch behind the backrest, as shown in the figure.
10• Make sure that the belt is fully tight to provide the highest security.
To remove the baby chair, unfasten the car safety belt from the rear of the chair, lower the handlebar to the horizontal position and detach the baby chair from the frame, which can be left inside the car, ready for use.
SAFETY BELT
11• The safety belt for the baby chair is
12• Fasten the safety belt overlapping the two straps.
13• Insert them into the buckle. 14• Put the child onto the chair and
adjust the belt tightness:
to loosen the belt, push the button with one hand and adjust the straps with the other; to tighten the belt, pull it toward yourself.
SWING CHAIR POSITION
The special frame shape enables the chair to swing, so that you can even rock your baby. To fix the chair, proceed as follows:
15• Swing the handlebar behind the backrest.
16• Turn the stabiliser feet as shown in the figure.
17• Example of use inside your house.
TO ADJUST THE HOOD
18• To raise or lower the hood, push down on the sides with both hands and raise or lower it till it clicks.
HEAD GUARDS
19• The car baby chair comes complete with head guard limiting head movement as well as protections for the safety belt.