Century Avanta manual Installation Without Base

INSTALLATION WITHOUT BASE

1

2

Place car seat rear-facingon vehicle seat. 6 Adjust handle to a position behind car seat.

Thread vehicle lap belt through car seat Slots and buckle belt.

NOTE: Vehicle shoulder belt must NOT be placed through car seat Slots.

3

4

Press down firmly on car seat to compress vehicle seat cushion while tightening vehicle lap belt (fig. a).

Pull front to back and left to right to check for secure installation (fig. b). Vehicle lap belt MUST stay tight.

If not secure, see “Vehicle Seat Belts” section.

5

8

Check level indicator on car seat.

Ball MUST be entirely in green zone (fig. c). If necessary place rolled Towels under car seat at vehicle seat crease.

NOTE: Vehicle must be on level ground and child in car seat when leveling.