Britax 70 CS manual Shows a tether acceptable for use

Page 31

Child Seat Functions

The Versa-Tether can indicate when the child seat has been in a moderate or severe crash (see page 4) and replacement of the child seat is necessary.

Figure 1 shows a tether acceptable for continued use

(provided the child seat has not been involved in a crash). The colored stitching will be intact but not visible from the back of the seat.

Figures 2 and 3 show examples of when the tether has been damaged and is unacceptable for continued use. If one or both of the loops have pulled through the back of the shell and/or any of the colored stitching has ripped, the child seat is no longer acceptable for use.

IMPORTANT: Discontinue use of child seat if it has been involved in a moderate or severe crash, regardless of whether the loops have pulled through the back side of the shell and the colored

stitching has been ripped.

Image 31

Contents Advocate 70 CS Page Table of Contents Death or Serious Injury can occur Section Title Important Notes Registration CertificationRear-Facing 5 40 lbs 2.3 18.1 kg Important Child Seat Usage InformationForward-Facing Harness Height Compatible Vehicle Seat Belts Lap-Shoulder 3-Point Belt Has a latch plate that locks the vehicle belt Lap Belt Tightens by feeding the belt webbing back into the retractor Incompatible Vehicle Seat Belts Vehicle Seating Positions 17 18 Belly Pad Harness Adjuster Lever under cover To tighten the harness Click & Safe Snug Harness IndicatorChecklist Loosen the harness Harness Height AdjustmentAdjusting Buckle Position Fastening the Buckle Releasing the Buckle Using the Chest ClipTo Open To Close Using the Lock-OffsInfant Body Pillow Rear-Facing Recline PositionsAcceptable overhang Unacceptable overhang Forward-FacingUsing Lower Anchors and Tethers for Children Latch Top Using the Versa-Tether Rear-Facing Tether Connector Strap To remove the Versa-Tether from the carry clip Shows a tether acceptable for use Latch Installation Before You Begin Install with Latch as shown above Rear-Facing Installation Check lower connector attachments Lap-Shoulder Belt Installation Before You Begin Install with lap-shoulder belt as shown above Loosen the harness Check buckle connection Lap Belt Installation Before You Begin Install with lap belt as shown above Replace the cover and belly pad Checklist Check that your vehicle has lower anchors Install with Latch as shown above Forward-Facing Installation Check Versa-TetherTop Tether attachment Lap-Shoulder Belt Installation Before You Begin Install with lap-shoulder belt as shown above Remove the body pillow and unbuckle the harness Side to side at the belt path Lap Belt Installation Before You Begin Install with lap belt as shown above Loosen the harness Checklist Forward-Facing Installation Rear-Facing InstallationSecuring Your Child Position the harness straps around the child Fasten the harness buckle Open the chest clip Care and Maintenance Care and Maintenance Cleaning the Side Impact Cushions Cleaning the CoverCleaning the Harness Cleaning the ShellCover Replacement Pull the buckle through the slot in the cover Remove the Buckle Cleaning the BuckleTo Clean Re-thread the Buckle Problem The harness cannot be adjusted to its full height TroubleshootingLimited ONE-YEAR Warranty Page Britax Child Safety, Inc

Related manuals

Manual 72 pages 59.43 Kb

70 CS specifications

The Britax 70 CS is a highly regarded car seat designed for optimal safety, comfort, and convenience for parents and their little ones. It exemplifies Britax's commitment to innovative features and thoughtful design, ensuring that both parents and children have peace of mind during travel.

One of the standout features of the Britax 70 CS is its unique SafeCell Technology. This system includes a specially designed base that compresses during a crash, lowering the center of gravity and reducing the likelihood of vehicle movement. This feature helps to keep the car seat more securely anchored in place, providing additional protection for the child in the event of an accident. Additionally, the car seat is equipped with a Deep Side Impact Protection system, which features a contoured shell that absorbs crash energy and absorbs impact forces, effectively safeguarding the child's head, neck, and torso.

Comfort is another key characteristic of the Britax 70 CS. The seat is engineered with plush, soft fabrics that provide a cozy environment for children. The seat also features multiple recline positions, allowing parents to adjust the angle for their child's comfort. This is particularly important for younger children who may need a more reclined position to support their head and neck.

Installation of the Britax 70 CS is designed to be user-friendly. The seat features the easy to use, secure installation system with a built-in lock-off that ensures the seat is tightly secured to the vehicle's seat. The LATCH (Lower Anchors and Tethers for Children) connectors make it simple to install the car seat without the use of the vehicle's seat belt.

In terms of versatility, the Britax 70 CS accommodates children from 5 to 70 pounds, allowing for extended use as the child grows. Its harness system is adjustable, ensuring proper fit as the child gains weight and height. Furthermore, it converts seamlessly from a rear-facing car seat for infants to a forward-facing seat for older children, making it a long-term investment for safety.

Overall, the Britax 70 CS stands out as a premier choice for parents seeking a car seat that brings together high-level safety features, comfort, and ease of use. Its combination of advanced technologies and thoughtful design makes it an excellent option for family journeys.