Britax 70 CS manual Important Child Seat Usage Information, Rear-Facing 5 40 lbs 2.3 18.1 kg

Page 8

Safety Information

Important Child Seat Usage Information

All infants must ride rear-facing at least until they have reached 1 year of age and weigh 20 lbs (9.1 kg).

An infant positioning insert may be necessary for small infants to achieve a snug fit if the child is under 12 lbs and the lowest harness slots fall above the infants shoulders. The Infant positioning insert is sold separately at select retailers and on www.britaxusa.com.

Britax advises that parents strongly consider the following when using this child seat.

Children should be secured with a harness system until they exceed the weight or height limits specified.

Britax recommends that children ride rear-facing to the highest weight or height specified.

WARNING! REAR-FACINGuse of this child seat is ONLY for children who meet ALL of the requirements below. If the child cannot be secured within these requirements because they are too small, use of the infant positioning insert or selection of a different child seat (such as an infant car seat) may be required. If the child cannot be secured within these requirements because the child is too large, review the forward-facing guidelines on page 7.

Rear-Facing: 5 – 40 lbs (2.3 – 18.1 kg)

Use rear-facing with children:

who weigh between 5 and 40 lbs (2.3 – 18.1 kg) and

1

2

inch

.

5

 

cm

when the top of the child’s head is at least 1 in. (2.5 cm) below the top of the child seat shell (Fig. A) and

• when the harness straps are at or slightly

A Rear-Facing

below the child’s shoulders (Fig. A).

 

IMPORTANT: See Harness Height Adjustment on page 18.

6

Image 8
Contents Advocate 70 CS Page Table of Contents Death or Serious Injury can occur Section Title Important Notes Certification RegistrationImportant Child Seat Usage Information Rear-Facing 5 40 lbs 2.3 18.1 kgForward-Facing Harness Height Compatible Vehicle Seat Belts Lap-Shoulder 3-Point Belt Has a latch plate that locks the vehicle belt Lap Belt Tightens by feeding the belt webbing back into the retractor Incompatible Vehicle Seat Belts Vehicle Seating Positions 17 18 Belly Pad Harness Adjuster Lever under cover Click & Safe Snug Harness Indicator To tighten the harnessChecklist Harness Height Adjustment Loosen the harnessAdjusting Buckle Position Using the Chest Clip Fastening the Buckle Releasing the BuckleInfant Body Pillow Using the Lock-OffsTo Open To Close Recline Positions Rear-FacingForward-Facing Acceptable overhang Unacceptable overhangUsing Lower Anchors and Tethers for Children Latch Top Using the Versa-Tether Rear-Facing Tether Connector Strap To remove the Versa-Tether from the carry clip Shows a tether acceptable for use Latch Installation Before You Begin Install with Latch as shown above Rear-Facing Installation Check lower connector attachments Lap-Shoulder Belt Installation Before You Begin Install with lap-shoulder belt as shown above Loosen the harness Check buckle connection Lap Belt Installation Before You Begin Install with lap belt as shown above Replace the cover and belly pad Checklist Check that your vehicle has lower anchors Install with Latch as shown above Forward-Facing Installation Check Versa-TetherTop Tether attachment Lap-Shoulder Belt Installation Before You Begin Install with lap-shoulder belt as shown above Remove the body pillow and unbuckle the harness Side to side at the belt path Lap Belt Installation Before You Begin Install with lap belt as shown above Loosen the harness Checklist Rear-Facing Installation Forward-Facing InstallationSecuring Your Child Position the harness straps around the child Fasten the harness buckle Open the chest clip Care and Maintenance Care and Maintenance Cleaning the Cover Cleaning the HarnessCleaning the Shell Cleaning the Side Impact CushionsCover Replacement Pull the buckle through the slot in the cover Cleaning the Buckle Remove the BuckleTo Clean Re-thread the Buckle Troubleshooting Problem The harness cannot be adjusted to its full heightLimited ONE-YEAR Warranty Page Britax Child Safety, Inc
Related manuals
Manual 72 pages 59.43 Kb

70 CS specifications

The Britax 70 CS is a highly regarded car seat designed for optimal safety, comfort, and convenience for parents and their little ones. It exemplifies Britax's commitment to innovative features and thoughtful design, ensuring that both parents and children have peace of mind during travel.

One of the standout features of the Britax 70 CS is its unique SafeCell Technology. This system includes a specially designed base that compresses during a crash, lowering the center of gravity and reducing the likelihood of vehicle movement. This feature helps to keep the car seat more securely anchored in place, providing additional protection for the child in the event of an accident. Additionally, the car seat is equipped with a Deep Side Impact Protection system, which features a contoured shell that absorbs crash energy and absorbs impact forces, effectively safeguarding the child's head, neck, and torso.

Comfort is another key characteristic of the Britax 70 CS. The seat is engineered with plush, soft fabrics that provide a cozy environment for children. The seat also features multiple recline positions, allowing parents to adjust the angle for their child's comfort. This is particularly important for younger children who may need a more reclined position to support their head and neck.

Installation of the Britax 70 CS is designed to be user-friendly. The seat features the easy to use, secure installation system with a built-in lock-off that ensures the seat is tightly secured to the vehicle's seat. The LATCH (Lower Anchors and Tethers for Children) connectors make it simple to install the car seat without the use of the vehicle's seat belt.

In terms of versatility, the Britax 70 CS accommodates children from 5 to 70 pounds, allowing for extended use as the child grows. Its harness system is adjustable, ensuring proper fit as the child gains weight and height. Furthermore, it converts seamlessly from a rear-facing car seat for infants to a forward-facing seat for older children, making it a long-term investment for safety.

Overall, the Britax 70 CS stands out as a premier choice for parents seeking a car seat that brings together high-level safety features, comfort, and ease of use. Its combination of advanced technologies and thoughtful design makes it an excellent option for family journeys.