Operation & Use
Toys
Waist | Waist | |
Belt | ||
Belt | ||
|
5 | Restraint | 6 | |
Pad | |||
|
•Place your baby in the bassinet.
•Position the restraint pad between your baby's legs.
•Fasten both waist belts to the buckles on each side of the restraint pad. Make sure you hear a "click" on both sides.
•Check to be sure the restraint is securely attached by pulling it away from your baby. The restraint should remain attached.
•Attach the toys to the canopy straps.
When Putting Baby to Sleep*
•NEVER place any covering higher than an infant’s shoulders.
•NEVER place infants to sleep on pillows, sofa cush- ions, adult beds, waterbeds, beanbags, or any other surface not specifically designed for infant sleep.
•Do not overdress your baby. If you feel comfortable,
your baby will too.
*This important safety message is brought to you by the Juvenile Products Manufacturers Association.
Anchored | Anchored |
End | End |
|
|
| B |
| B |
|
|
Free End |
| Free End |
|
Tighten | Buckle | Loosen | Buckle |
To tighten the waist belts:
•Feed the anchored end of the waist belt up through the buckle to form a loop 
.
•Pull the free end of the waist belt B .
•Repeat this procedure to tighten the other waist belt.
To loosen the waist belts:
•Feed the free end of the waist belt up through the buckle to form a loop 
.
•Enlarge the loop by pulling on the end of the loop toward the buckle.
•Pull the anchored end of the waist belt to shorten the free end of the waist belt B .
•Repeat this procedure to loosen the other waist belt.
Note: After adjusting the waist belts to fit your child, make sure you pull on them to be sure they are securely fastened.
9