ASSEMBLY and USE continued
5 Insert one side of floorboard | |
under Pocket on side of |
|
bassinet. |
|
Pockets
6Pull Pocket down over
floorboard to hold floorboard in place.
Repeat steps 5 and 6 for other side of floorboard.
7Push down on center of
floorboard to flatten.
Bassinet assembly is now complete.
•Bassinet can be used with or without Playard/Crib.
•Bassinet can be used with or without changer.
To use bassinet with Playard/Crib:
1 Place bassinet in Playard so that hooks go over long rails with
NOTE:
T-Slots
2 Secure bassinet to Playard:
• Pass Attachment Strap through opening in corner of side panel of Playard.
• Fasten strap to outside of Playard.
Repeat for other strap.
Bassinet is now ready for use with Playard/Crib.
To use bassinet without Playard/Crib:
WARNING
Prevent falls and suffocation:
•Use only on a surface that is flat, level and stable.
•Keep bassinet away from surface edges.
1Set bassinet on flat and stable surface that will keep floorboard level so child will not roll into corner or side of bassinet resulting in breathing difficulties.
2Keep at least 30.5 cm (12 inches) away from surface edges and stay within reach of child. Child’s wiggling and rocking may cause bassinet to move and possibly fall off surfaces.
5