Graco PD254443A owner manual FORWARD-FACING Installation

12.0 FORWARD-FACING INSTALLATION

1.Test base for secure installation. See TFDUJPOT

BOE

GPS
CBTF
JOTUBMMBUJPO
Q
 A.

2.Push in B and rotate knobs C on both sides of child restraint to unlock position.

3.Place on base in forward-facing position D.

4.Rotate knobs on both sides to lock seat to base E.

You will see lock symbols in windows on side of base as shown H.

5.If you see the red flags up in the child restraint seating area F and you see the unlock symbol I then seat is not secured to base.

6.Check seat is secure by moving front to back and left to right at the belt path G. Base should not move more than 1 inch ( 2.54 cm). If belt loosens or lengthens, repeat procedure.

Note: See i
5FUIFS
6TFw
Q
 to attach tether.

A

D

F

36