Graco PD213671A manual

4.	To create a secure installation, while	œ
	pushing down on the base, pull the free
	end of the lap belt or the shoulder portion
	of the lap/shoulder belt to tighten œ.
5.	Check that belt does not move by pulling
	and pushing hard on base with hands near the
	vehicle belt path. If belt loosens
	or lengthens, repeat procedure.

6. Push the infant restraint down into the base and make sure that you hear a “click” . Pull up on the infant restraint to be sure it

is latched securely into the base.

If the infant restraint does not securely latch	
into the base, the infant restraint provides NO
protection for your child. DO NOT use the infant
restraint/base if the infant restraint does not
securely latch into the base.

7. Test infant restraint for secure installation as described in infant restraint “Final Safety Check” page 42.

29