REAR-FACING INSTALLATION WITH LATCH
Adjust child restraint to recline position (fig. a). Flip recline feet under child restraint for rear facing use.
Place
&OROEASE OFAINSTALLATIONIEXTEND LATCH belt
TO ITS MAXIMUM LENGTH
(OOK CONNECTORSNTO VEHICLE LOWER ANCHORS
(fig. b). Belt must lay flat and not be twisted. Pull connectors to be sure they are securely attached to the anchor points. (fig. c).
#HECK#THAT THE LOWER ANCHORTBELT STAYS TIGHT and does not slip from the tightened position. If
IT DOESTNOTDSTAY TIGHTOTRYYANOTHEROSEATINGR POSITION ORICONTACTN#USTOMER 3ERVICE
#HECK#LEVELCINDICATORVON CHILD RESTRAINT (fig. f).
Vehicle must BEBON LEVEL GROUNDVANDLCHILDRIN U CHILDCRESTRAINT WHEN CHECKINGILEVEL INDICATOR
Ball MUST be entirely in green zone (fig. f). If
NECESSARYPLACELROLLED TOWELSLUNDERDCHILDO RESTRAINT ATRVEHICLETSEAT CREASE UNTIL ENTIRE BALL A IS INIGREENIZONEG 4HENERECHECK LEVEL INDICATOR
DO NOT use tether
0RESSEDOWN lRMLY INNCENTER OFLCHILDIRESTRAINTN while pulling LATCH adjustment belt. (fig. d).
0ULL FRONT TORBACK AND LEFT TO RIGHT ATABELT PATH TO CHECK FOR SECUREFINSTALLATION (fig. e).
0ERIODICALLY CHECK THATYCHILDHRESTRAINTTIS SECURELYH INSTALLED AND PROPERLYALEVELED ADJUSTDIF NECESSARY
4OOREMOVE LATCHSEE h2EMOVING LATCH from 6EHICLE !NCHOR 0OINTSv PR
18