To Put Children in the Stroller
Avoid rearward tipping. Placing weight only in the rear of this stroller could cause the stroller to tip backwards.
To Change to Swivel or Non-swivel Wheels
Front swivel wheels lock for use on uneven surfaces such as grass, stones or gravel.
!Always place the heaviest child or the heaviest child/carrier combination in the front seat.
!Always place the front child first. When unloading, remove the rear child first.
!Never place purses, shopping bags or accessory items on the handle or canopy.
Place more weight
in front seat
Before locking swivels, first push stroller forward a few feet to ensure that the wheels are correctly positioned.
Push lock button UP to lock the swivels.
Push button DOWN to release.
Turn swivel to check that it is locked or released.
To Secure Your Child
Avoid serious injury from falling or sliding out. Always use seat belt.
Step 1.
Place crotch strap between legs and fasten both belt buckles together.
Step 2.
Adjust belt at both buckles as needed to get a snug fit around your child.
Step 3.
Squeeze sides of buckles to release.
To Use Brakes
Always apply both brakes to park stroller.
Push DOWN to park.
Check to make sure brakes are on by trying to push the stroller.
Lift UP to stroll.
To Attach the Graco® Safety Seat (sold separately)
Improper use of this stroller with a carrier may result in serious injury or death.
Do not use this stroller with a safety seat that is not the Graco® brand.
Read the owner’s manual provided with your Graco® safety seat before using the seat with this stroller.
If you do not have the owner’s manual for the Graco® safety seat, call Graco at
Make sure the stroller is fully assembled according to the preceding instructions, with the front tray or rear armbar (on certain models) attached. Do not use a safety seat in any stroller seat that does not have a tray or arm bar installed.
Step 1.
If the stroller is folded, unfold it. Fully recline the back of the stroller seat that is to be used with a safety seat. Push down on the tray or arm bar to be sure it is securely attached to the stroller.
Step 2.
Unbuckle the stroller seat belt, move the buckles all the way to the loose end of the seat belt webbing, and hang buckles outside of the stroller.
11 | 12 |