Graco 24K962 Traffic Hazard, Fire and Explosion Hazard, Injection Hazard, Carbon Monoxide Hazard

Page 3

Warnings

Warnings

The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclamation point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific risks. When these sym- bols appear in the body of this manual or on warning labels, refer back to these Warnings. Product-specific hazard sym- bols and warnings not covered in this section may appear throughout the body of this manual where applicable.

WARNING

TRAFFIC HAZARD

Being struck by other vehicles may result in serious injury or death.

• Do not operate in traffic.

• Use appropriate traffic control in all traffic areas.

• Follow local highway and transportation regulations for traffic control (for example: Manual on Uniform Traffic Control Devices, U.S. Department of Transportation).

FIRE AND EXPLOSION HAZARD

Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help prevent fire and explosion:

• Use equipment only in well ventilated area.

• Do not fill fuel tank while engine is running or hot; shut off engine and let it cool. Fuel is flammable and can ignite or explode if spilled on hot surface.

• Keep work area free of debris, including solvent, rags and gasoline.

• Ground all equipment in the work area. See Grounding instructions.

• Use only grounded hoses.

• Hold gun firmly to side of grounded pail when triggering into pail. Do not use pail liners unless they are anti- static or conductive.

• Stop operation immediately if static sparking occurs or you feel a shock. Do not use equipment until you identify and correct the problem.

• Keep a working fire extinguisher in the work area.

INJECTION HAZARD

High-pressure fluid from gun, hose leaks, or ruptured components will pierce skin. This may look like just a cut, but it is a serious injury that can result in amputation. Get immediate surgical treatment.

• Do not spray without tip guard and trigger guard installed.

• Engage trigger lock when not spraying.

• Do not point gun at anyone or at any part of the body.

• Do not put your hand over the spray tip.

• Do not stop or deflect leaks with your hand, body, glove, or rag.

• Follow the Pressure Relief Procedure when you stop spraying and before cleaning, checking, or servicing equipment.

• Tighten all fluid connections before operating the equipment.

• Check hoses and couplings daily. Replace worn or damaged parts immediately.

CARBON MONOXIDE HAZARD

Exhaust contains poisonous carbon monoxide, which is colorless and odorless. Breathing carbon monoxide can cause death.

•Do not operate in an enclosed area.

PRESSURIZED ALUMINUM PARTS HAZARD

Use of fluids that are incompatible with aluminum in pressurized equipment can cause serious chemical reaction and equipment rupture. Failure to follow this warning can result in death, serious injury, or property damage.

•Do not use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids con- taining such solvents.

•Many other fluids may contain chemicals that can react with aluminum. Contact your material supplier for com- patibility.

3A2090A Operation

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents LineLazer IV 250SPS Self-Propelled Line Striper3A2090A Table of Contents Carbon Monoxide Hazard Traffic HazardFire and Explosion Hazard Injection HazardEntanglement Hazard Moving Parts HazardEquipment Misuse Hazard Battery Safety Burn HazardPersonal Protective Equipment Component Identification Sprayer Component Identification Controls For Flammable Materials Only Grounding Procedure Pressure Relief ProcedureSetup/Startup Start engine Move fuel valve to open 15 SEC SwitchTip and Guard AssemblyGun Placement Install GunPosition Gun Removal Gun Arm MountsChange Gun Position Front and Back Change Gun Position Left and RightInstallation Adding Gun Cable Gun Cable AdjustmentChange Trigger Position Gun Positions Chart Parking / Emergency Brake Driving InstructionsStraight Line Adjustment Handle Bar Height AdjustmentDrive Engagement Platform Storage Position Front Pad AdjustmentQuick Guide Smart Control OverviewInitial Setup Smart Control OperationCalibration Calibration Error Displays Next Change Units or LanguageMatic Mode Operation in Manual ModeOperation in Automatic Mode Preset Skip PatternsAdvanced Preset Skip Patterns Basic Stalls Parking Layout ModeParking Mode Advanced Parking CalcAngle Stalls Other Uses Marker ModeMachine Information Measure ModePerform Pressure Relief Procedure, CleanupInstallation Hydraulic Oil/Filter ChangeRemoval Metric Dimensions Technical Specifications3A2090A Operation 3A2090A Operation Graco Information Graco Standard Warranty

24K961, 24K962, 24M608, 24K960 specifications

Graco, a leading manufacturer in the field of fluid management and paint application equipment, offers a variety of high-quality products tailored for both professional contractors and DIY enthusiasts. Among its impressive lineup are the Graco 24K960, 24M608, 24K962, and 24K961, each designed with unique features and cutting-edge technologies to meet the diverse needs of its users.

The Graco 24K960 is a robust airless paint sprayer, engineered for high efficiency and superior performance. One of its standout features is the ProConnect system, allowing users to easily swap out the pump without needing any tools. This innovative technology minimizes downtime and enhances productivity on the job site. The 24K960 is also equipped with a pressure control system, enabling users to adjust the spray pressure for various materials and surfaces, ensuring a smooth and even finish every time.

Next in the lineup is the Graco 24M608, designed specifically for small to medium-sized projects. This sprayer is distinguished by its lightweight, portable design, making it easy to transport and maneuver. The 24M608 features a SoftSpray technology that delivers a fine finish with reduced overspray. This is particularly beneficial for those working in residential settings or confined spaces, where precision is crucial. Additionally, the adjustable spray pattern allows users to switch between horizontal and vertical applications seamlessly.

The Graco 24K962 brings versatility with its ability to handle a wide range of coatings, from stains to heavy latex paints. This model incorporates the Endurance Pump, designed for longer service intervals and enhanced durability. The ergonomic design ensures comfortable operation, even during extended work periods. With its adjustable pressure setting, the 24K962 allows for optimal control over the spraying flow, catering to the specific requirements of each project.

Lastly, the Graco 24K961 is tailored for professionals looking for reliability and power. Featuring a heavy-duty frame and a powerful motor, this sprayer offers impressive spraying capabilities, capable of handling large projects with ease. Its SmartControl technology allows for consistent spray patterns and eliminates the frustration of fluctuating pressure, ensuring top-quality results on every job. The 24K961 also emphasizes easy maintenance, with accessible components designed for quick servicing.

In summary, the Graco 24K960, 24M608, 24K962, and 24K961 are exemplary choices for anyone seeking top-notch performance in paint application. With their unique features, advanced technologies, and user-friendly designs, these models cater to a range of user preferences and project requirements, solidifying Graco's reputation as an industry leader.
Top Page Image Contents