Graco 30 manual Using Infant Restraint, Positioning Harness Straps

7.0Using Infant Restraint

7.1Positioning Harness Straps

FAILURE TO PROPERLY ADJUST THE HARNESS STRAPS FOR YOUR CHILD INCREASES THE RISK OF SERIOUS INJURY OR DEATH IN THE EVENT OF A SHARP TURN, SUDDEN STOP, OR CRASH. The harness straps must be properly adjusted to fit your child according to the following instructions.

1.	Remove infant restraint	™
	from base and rotate handle
	down to sitting position.
	See “5.1 Adjusting Handle” and
	“5.2 Removing and Attaching
	Infant Restraint”, page. 23.
2.	Place child in seat as shown ™.		š
3.	Determine which pair of harness slots are even
	with or just below your child’s shoulders š.
4.	If the harness straps must be
	adjusted: remove child from infant
	restraint and move harness straps
	to the proper harness slots by doing		Use harness slots
	the following:
		even with or just below

child’s shoulders

35