8.NEVER put two LATCH connectors on one vehicle LATCH anchor .
9. Test child restraint for secure installation as described in child restraint “Final Safety Check” page 41.
10. Check that the LATCH stays tight and does not slip from the tightened position. If it does not stay tight, try another seating position or contact Graco at
11. To remove LATCH, release the tension on the LATCH connector by pushing button in as shown .
12. Press button on LATCH .
13. Pull out (away from anchor point). ¡.
14. Repeat steps 12 and 13 for other connector.
¡
31