Battery Installation, Using AC Adapters, Parent Unit

Battery Installation

Parent Unit

•The battery must be plugged into the Parent Unit before the

unit will be ready for use. Remove the battery door cover on the Parent Unit with a key or flat blade screw driver. Remove the battery pack from the packaging and plug into the back of the unit. Place the battery pack into the recess and press the wire into the slot on the side. Replace the battery door.

Nursery Unit

•Turn the unit over, and use screw driver to remove the battery door.

•Place 3-AAA (1.5V-LR03) batteries into the battery compartment. Note the proper orientation of the batteries.

•Do not mix old and new batteries.

•Do not mix alkaline, standard (carbon zinc), or rechargeable (ni-cadmium, etc) batteries.

•Place the battery door back on the unit.

•Please remove a dead battery promptly. A dead battery left in the unit may leak, damaging your unit.

•Do not attempt to recharge a non-rechargeable battery.

•A rechargeable battery CANNOT be recharged by plugging the AC adapter into the Nursery Unit.

•Remove the batteries from the unit if it is no longer being used or will be stored for an extended period of time.

Plug in cord


-	+	-
+	-	+

Batteries should be disposed of properly by recycling.

Using AC Adapters

•The Parent Unit(s) can use either the rechargeable battery that comes with the unit or standard 120 volt AC household current. The Nursery Unit uses 3-AAA (1.5V-LR03) batteries or standard 120 volt AC household current.

•To use AC adapters, plug the connector on the cord into the AC adapter jack on the side of the Parent Unit and the back of the Nursery Unit, then plug adapter into a standard wall outlet.

•Use ONLY the Graco adapters included with the unit. Do not use these adapters with other equipment under any circumstances.

•If units do not work, check that AC adapters are plugged into working outlets.

•When electricity is off (from a power failure, etc.), the Nursery Unit will operate on 3-AAA (1.5V-LR03) batteries. If the Power LED is not lit, turn the power off and then back on to the Nursery Unit. A green LED indicates that the batteries are fine. A red LED indicates that the batteries are low. If the LED does not light at all, then replace the batteries. The Parent Unit will operate if the rechargeable battery is charged.

Selecting Channels

•In case you are experiencing some interference, the channel on the Nursery Unit can be changed by pressing the “ch” button on the side of the unit. The Parent Unit will automatically scan all of the available channels until it locks on to the Nursery Unit. If you are still experiencing interference, press the channel button on the side of the Nursery Unit up to 6 times until a good channel is found.

2M20, 2M19 specifications

The Graco 2M19 and 2M20 are advanced airless paint sprayers that are designed for professionals seeking efficiency and precision in their painting projects. These models stand out for their robust build quality, ease of use, and high performance, making them suitable for a variety of applications, from residential to commercial painting.

One of the primary features of the Graco 2M19 and 2M20 is their powerful electric motor. The motors are engineered to deliver consistent pressure, enabling users to achieve a smooth and even finish on surfaces of all types. This powerful motor is capable of handling thicker materials, allowing for versatility in coating applications, including latex and oil-based paints.

Both models are equipped with Graco's innovative ProConnect technology. This feature allows for simple and efficient tip changes in seconds without the need for tools, enhancing productivity on the job. This means that contractors can easily switch between different spray tips, optimizing the sprayer for various tasks, whether it's fine finishing or heavy coatings.

The 2M19 and 2M20 also feature an in-line filter that helps ensure a continuous flow of paint while preventing debris from clogging the system. This filtration system is particularly beneficial in maintaining the quality of the work and reducing downtime for cleaning and maintenance.

An important characteristic of these sprayers is their compact and portable design. Weighing less than many other models in their class, the Graco 2M19 and 2M20 are easy to transport around job sites. Their ergonomic handle and lightweight construction help minimize user fatigue during extended periods of work.

Moreover, both models offer adjustable pressure settings, allowing painters to customize the spray pressure to suit different surfaces and materials. This flexibility ensures optimal coverage and finish, whether working on textured walls, fences, or furniture.

For those who prioritize ease of cleaning, Graco has incorporated a convenient Clean-Out System in the 2M19 and 2M20. This design reduces cleanup time significantly, enabling users to switch colors swiftly or pack up at the end of the day without hassle.

In summary, the Graco 2M19 and 2M20 airless paint sprayers combine advanced technology, user-friendly features, and high versatility. With their reliable performance, durable construction, and innovative features, these sprayers are ideal for professionals looking to enhance their painting efficiency and achieve quality results on every project.