Graco 2M20, 2M19 warranty Low Battery Indication, Setting Up the Baby Monitor, Testing the System

Page 4

Low Battery Indication

Parent Unit

•When the battery is low in the parent unit, the LED bar on the side of the unit will change from green to red and you will hear a series of 3 audible beeps every 5 seconds. If operated too long on a low battery, you may also experience a poor signal and the connection LED on the front of the parent unit may change from green to red and you will begin to hear a continuous audible beep from the Parent Unit.

•You may either turn off the unit or plug in the A/C adapter to recharge the batteries.

Nursery Unit

•When the batteries are low in the Nursery Unit, the power LED will change from green to red. You may also experience a poor signal and the connection LED on the front of the Parent Unit may change from green to red and you will begin to hear the Parent Unit beep.

•You may either turn off the unit, plug in the A/C adapter or replace the batteries.

Out of Range Indication

•If the Parent Unit begins to lose the signal from the Nursery Unit, the connection LED (bottom Sound Light LED) will change from green to red. Additionally, a continuous audible beep will be generated to warn the user that the connection to the Nursery unit has been lost.

•Immediately move the Parent Unit closer to the Nursery Unit to regain connection.

•Once connection has been re-gained, the connection LED will change from red to green and the audible beep will stop.

***Note: It is not uncommon for the Parent Unit to occasionally lose and regain connection with the Nursery Unit in environments that have a significant amount of obstructions.

Setting Up the Baby Monitor

***NOTE: It is very important that the steps below be followed for first time power-up.

1.For optimum operation, it is best to charge the batteries in the Parent Units for at least 16 hours prior to use. The rechargeable batteries need to be installed into the Parent Unit before charging - refer to the “Battery Installation” section. DO NOT turn on power while the unit is charging for the first time.

2.Place the Nursery Unit within 10 feet (3 meters) of your baby. Plug an AC adapter into the jack on the back of the Nursery Unit. Plug it into a working 120 volt AC outlet.

3.Aim the Nursery Unit toward your baby. Check that there are no walls or large objects that could block sound transmission.

4.Place the Parent Unit within five (5) feet (1.5 meters) of the Nursery Unit and turn on the Parent Unit using the On/Off switch on the side of the unit. All of the Sound Light LEDs will illuminate, and the bottom LED will be red. You will also hear a single audible beep.

5.Turn on the Nursery Unit using the On/Off switch on the side. The green power light should come on.

6.Within a few seconds, the Parent Unit will lock on to the Nursery Unit and the top four (4) green LEDs will shut off.

A second later, you will hear a series of beeps and the connection LED should change from red to green. Your monitor is now ready for use.

Testing the System

It is VERY IMPORTANT to test the system when first set up, and at regular times thereafter. Test the units if you suspect they may have been damaged or have not been used for a long time.

1.If two adults are present, have one take the Parent Units to different locations, trying various volume settings, while the other speaks into the Nursery Unit.

2.If only one adult is available, place a ticking clock, radio, or other sound-producing device near the Nursery Unit to test it.

3.When testing, keep the level of your child’s sounds in mind, and adjust the volume accordingly.

4.If there is sound interference, switch the Nursery Unit and the Parent Units to the other channel setting.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Product Registration USA Replacement Parts Warranty Information USA2M19VIB / 2M20VIB Use only with 110-120 volt AC electrical outlets FCC StatementBattery Installation Using AC AdaptersSelecting Channels Parent UnitLow Battery Indication Setting Up the Baby MonitorTesting the System Out of Range IndicationOperation Vibration Alert FeatureTo Listen To Baby TroubleShooting Características del producto ENCENDIDO/APAGADODeclaración de la Comisión Federal de Comunicaciones Instalación de las pilas Uso de los adaptadores de Corriente alternadaSelección de canales Unidad para padresInstalación del monitor del bebé Indicador de pilas descargadasIndicación de que está fuera de rango Prueba del sistema FuncionamientoFunción de alerta con vibración Para escuchar al bebéNo hay sonido Bajo sonidoEstática Sonido agudo retroalimentación

2M20, 2M19 specifications

The Graco 2M19 and 2M20 are advanced airless paint sprayers that are designed for professionals seeking efficiency and precision in their painting projects. These models stand out for their robust build quality, ease of use, and high performance, making them suitable for a variety of applications, from residential to commercial painting.

One of the primary features of the Graco 2M19 and 2M20 is their powerful electric motor. The motors are engineered to deliver consistent pressure, enabling users to achieve a smooth and even finish on surfaces of all types. This powerful motor is capable of handling thicker materials, allowing for versatility in coating applications, including latex and oil-based paints.

Both models are equipped with Graco's innovative ProConnect technology. This feature allows for simple and efficient tip changes in seconds without the need for tools, enhancing productivity on the job. This means that contractors can easily switch between different spray tips, optimizing the sprayer for various tasks, whether it's fine finishing or heavy coatings.

The 2M19 and 2M20 also feature an in-line filter that helps ensure a continuous flow of paint while preventing debris from clogging the system. This filtration system is particularly beneficial in maintaining the quality of the work and reducing downtime for cleaning and maintenance.

An important characteristic of these sprayers is their compact and portable design. Weighing less than many other models in their class, the Graco 2M19 and 2M20 are easy to transport around job sites. Their ergonomic handle and lightweight construction help minimize user fatigue during extended periods of work.

Moreover, both models offer adjustable pressure settings, allowing painters to customize the spray pressure to suit different surfaces and materials. This flexibility ensures optimal coverage and finish, whether working on textured walls, fences, or furniture.

For those who prioritize ease of cleaning, Graco has incorporated a convenient Clean-Out System in the 2M19 and 2M20. This design reduces cleanup time significantly, enabling users to switch colors swiftly or pack up at the end of the day without hassle.

In summary, the Graco 2M19 and 2M20 airless paint sprayers combine advanced technology, user-friendly features, and high versatility. With their reliable performance, durable construction, and innovative features, these sprayers are ideal for professionals looking to enhance their painting efficiency and achieve quality results on every project.
Top Page Image Contents