BATTERY INSTALLATION
•Unscrew the battery cover with a Phillips head screwdriver (not included).
•Remove batteries included for demonstration purposes and dispose of them safely.
•Install 4 "AA" (LR6) alkaline batteries in the orientation
•For best performance, use only alkaline batteries.
•Replace battery cover and tighten screw.
•Replace batteries if sounds are garbled or if toy movements are slow.
TO PLAY
1
I=ON
O=OFF
Page 2 of 4
2
Press either button to activate.
If the product does not function properly, move the switch to OFF then ON again to reset.
•Do not play with toy on furniture surfaces.
•Furniture surfaces may be scratched by the toy’s foot.
•Works best on flat, level, hard surfaces such as a linoleum or tile floor.
Page 3 of 4