Ingersoll-Rand 111 Product Safety Information, Product Specifications, Parts and Maintenance

Product Safety Information

Intended Use:

These Air Ratchet Wrenches are designed to remove and install threaded fasteners.

For additional information refer to Air Ratchet Wrenches Product Safety Information Manual Form 04580361.

Manuals can be downloaded from www.irtools.com.

Product Specifications

		Free	Recommended	Sound Level dB (A)		Vibration
	Drive					Level
		Speed	Torque Range	(ANSI S5.1-1971)
Model(s)						(ISO8662)
	Size	rpm	ft-lb (Nm)	Pressure	Power	m/s²
					(ISO3744)
111	3/8”	300	10-50 (14-68)	86.6	97.6	5.6
1111	1/2”	300	10-50 (14-68)	86.6	97.6	5.6

Installation and Lubrication

Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any hose coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling disconnects. See drawing 16571812 and table on page 2. Maintenance frequency is shown in circular arrow and defined as h=hours, d=days, and m=months. Items identified as:

1.	Air filter	8.	Safety Air Fuse
2.	Regulator	9.	Oil
3.	Lubricator	10.	Grease - Inject between ratchet housing and yoke to lubricate
4.	Emergency shut-off valve		drive bushing.
5.	Hose diameter	11.	Grease - Disassemble ratchet head and lubricate
6.	Thread size		components.
7.	Coupling	12.	Grease - Inject into grease fitting.

Parts and Maintenance

When the life of the tool has expired, it is recommended that the tool be disassembled, degreased and parts be separated by material so that they can be recycled.

The original language of this manual is English.

Tool repair and maintenance should only be carried out by an authorized Service Center.

Refer all communications to the nearest Ingersoll-RandOffice or Distributor.

Form 04585014-Edition 1 3