Meyer 9130T, 9128, 9126, 9136T, 9124, 9122 manual Gearbox & Chain Drive, KEY Description

		GEARBOX & CHAIN DRIVE
KEY	PART NO.	DESCRIPTION
1	55-0122	Hydraulic Motor
2	25-8202	Motor Bracket
3	14-0044	2" Pillow Block Bearing
4	10-0091	Sprocket, 120B30, 2” Bore, ½” Key
5	10-0090	Sprocket, 120B9, 1-1/2” Bore, ½” Key
6	11-0133	#120-50 Roller Chain
7	805-0063-Z	Washer, 5/8” Flat
8	851-6311-2.5Z	Bolt, 5/8-11 x 2-1/2 Hex Head Machine Bolt
9	25-8207	Chain Tightener Spring Sleeve Weldment
10	25-8209	Apron/Tightener Holder Assembly
11	25-8206-1	Center #120 Tightener Arm Less Roller
12	815-7510-Z	3/4-10 Nylon Insert Locknut
13	851-7510-3Z	3/4-10 x 3" M.B.
14	25-8204	Chain Tightener Adjuster Rod
15	38-0013	5/16 x 1-3/4" Roll Pin
16	912-0016	7/8” Nylon Roller Complete
16A	912-0016-1	Nylon Roller Only
16B	912-0016-2	Inner Sleeve
17	23-0102-1	Jackshaft, 2” x 96”
18	35-0024	Key, ½” x ½” x 2 1/2” (1045 Mat)
19	25-8205-1	Tightener Arm Assembly, Less Roller
20	29-0009	Compression Tightener Spring
21	75-0453	Spindle Washer Punchout
22	10-0085	Sprocket, 120B9, 2" Bore, 1/2" Key
23	11-0132	#120-46 Roller Chain
24	35-0009	3/8 x 3/8 x 2-1/4" Key (1045 Material)

25810-6311-Z 5/8-11 Spin Locknut

26805-0075-Z Bolt Guide Sleeve Plate

27	30-0010	1/8" NPT Zerk
28	25-8208	Tightener Pivot Shaft
29	25-8210	Center Tightener Pivot Shaft

30851-3816-1Z Bolt, 3/8-16 x 1” Hex Head Machine Bolt

31806-0038-Z 3/8” Internal Tooth Lockwasher

32851-5013-2Z Bolt, 1/2-13 x 2” Hex Head Machine Bolt

33810-5013-Z 1/2-13 Spin Locknut

--16-- 9100 Rear Unload