Dantax LR-7500 manual Tuner Operation, Station Selection, Tuner-Mode, Preset Memory

Page 21

Tuner Operation

TUN/PRE

SELECT

SOURCE

AM/FMT.MODE

The LR-7500's tuner is capable of tuning AM,FM and FM Stereo broadcast stations. Stations may be tuned manually, or they may be stored as favorite station presets and recalled from a 50-position memory.

Station Selection

1Press the AM/FM button on the remote controller to select the tuner as an input

or

The tuner may be selected from the front panel by either pressing the SOURCE (6/n) buttons until the tuner is active or by pressing the AM/FM button.

2Pressing the AM/FM button or the AM/FM button on the front panel again to switch between AM and FM so that the desired frequency band is selected.

3Press the T.MODE on the front panel (or the TUN-M but- ton on the remote controller) to select manual or auto- matic tuning.

4Select "AUTO TUNING" and each press of the TUNING(v/^) button (or TUN/PRE button). Then put the tuner in a scan mode that seek the next higher or lower frequency station with acceptable signal strength.

•Select "MAUNAL TUNING" and each press of the TUN- ING(v/^) button (or TUN/PRE button). The frequency increases or decreases by one increment.

5Stations may also be tuned directly. To enter a station's frequency directly, first select the AM or FM. Next, press the DIRECT button on the remote controller and enter the station frequency by pressing the Numeric buttons.

NUMERIC AM/FM

TUNING

TUN-M DIRECT

PRESET

MEMO

Tuner-Mode

Pressing the TUN-M button on the remote controller alternates between Stereo mode and Mono mode.

- STEREO

FM stereo broadcasts are received in stereo and the STEREO indicator lights in the display.

- MONO

To compensate for weak FM stereo reception, select this mode. Reception will now be forced monaural, reducing unwanted noise.

Preset Memory

You can preset a maximum of 50 favorite channels.

1Press the MEMO button. The two underscore lines will appear at the far right side of the display.

2Within 5 seconds, press the Numeric buttons corre- sponding to the location where you wish to store this station's frequency.

3Repeat the process after tuning any additional stations to be preset.

Recalling Preset Stations

•To manually select a station previously entered in the pre- set memory, press the Numeric buttons that correspond to the desired station's memory location.

•To manually tune through the list of stored preset stations one by one, press the PRESET(v/^) button or the remote controller or the TUN/PRE (6/n) button on the front panel.

- 21 -

Page 20 Page 22
Image 21
Page 20 Page 22
Contents LR-7500 IMPORTANTfor U.K.Customers Important Safety InstructionsBlue Neutral Brown Live If in Doubt Consult a Competent ELECTRI- CianTable of Contents Before Use When to Use ResetRead this before operation Back-up Memory FunctionNeo6 offers several important improvements as follow DescriptionAbout Dolby Pro Logic Description ConnectionsFront left and right speakers Center speakerSubwoofer Surround back speakersFront left and right speakers, and a center speaker Surround left and right speakers, and surround back speakerPower cord AC Input PRE OUT SUB Woofer jackRS-232C Audio Components Video jack Component jackVideo convert Video Components and Advanced Connecting Connecting the supplied AM loop antenna Connecting the supplied FM antennaFront Panel Control FunctionsPower Display Remote Control UnitTEST-T TV / VIDPreset UP/ Down Tuning UP/DOWNTOP Menu DirectionControl Functions Basic Operations Surround Mode Selector Volume knobSleep Timer Function Tone ControlMAX Surround Mode Night ModeMID OFFSize of Speakers Speaker ConfigurationInput the distance from your listening position Balancing relative volume between speakers using Test ToneTuner Operation Preset MemoryStation Selection Tuner-ModePS Program Service Name RDS Radio Data System Remote Controller OnlyPTY Program Type CT Clock TimeMaking Configuration Adjustments System Configuration OSD On Screen DisplayVideo Operations Video Tape DubbingFunction Setup System ConfigurationSurround Setup Function SetupDolby Surr Dolby SurroundUpsampling Speaker Setup Distance Adjust CH Level AdjustPreference Setup Direct Code Entry Method Controlling other Components Connected to the LR-7500Manual Search Method Code Check MethodVCR Brand List Programming the RemoteSAT Brand List TV Brand List Erres Pathe Cinema Symptom Cause Solution TroubleshootingOutput Power SpecificationsDTS PAL / NtscLuxman CORPORATION, Japan

LR-7500 specifications

The Dantax LR-7500 is an advanced audio receiver that embodies the perfect blend of cutting-edge technology, sleek design, and versatile functionality. Tailored for audiophiles and general users alike, the LR-7500 boasts a variety of features that set it apart in the realm of home audio systems.

One of the standout features of the Dantax LR-7500 is its extensive connectivity options. The receiver supports various input sources, including HDMI, optical, USB, and traditional analog connections, ensuring compatibility with a wide range of devices such as televisions, gaming consoles, and streaming players. The inclusion of Bluetooth functionality allows users to stream music wirelessly from their smartphones and tablets, providing convenient access to digital audio libraries and online streaming services.

In terms of sound quality, the LR-7500 is equipped with high-quality digital-to-analog converters (DACs) that deliver crystal-clear audio reproduction across the frequency spectrum. The receiver supports high-resolution audio formats, making it an excellent choice for those who appreciate the nuances of music. With built-in equalization settings, users can customize their listening experience, optimizing sound performance to suit their preferences.

The Dantax LR-7500 also features advanced surround sound technologies, such as Dolby Atmos and DTS:X, which create an immersive audio experience for home theater enthusiasts. These technologies envelop listeners in three-dimensional soundscapes that enhance movies, music, and gaming.

Another significant characteristic of the LR-7500 is its user-friendly interface. The receiver comes with an intuitive remote control and a well-designed on-screen menu, making navigation seamless and straightforward. Additionally, the device offers support for multi-room audio, allowing users to enjoy synchronized sound in different areas of their home.

Durability and aesthetics are also key considerations in the design of the Dantax LR-7500. The unit features a robust build, ensuring reliability over time, while its modern and stylish appearance allows it to complement any home décor.

In summary, the Dantax LR-7500 is a state-of-the-art audio receiver that combines high-quality sound reproduction, extensive connectivity options, and user-friendly features. Whether for music, movies, or gaming, it stands out as a versatile solution, making it an excellent choice for any audio enthusiast looking to enhance their listening experience.
Top Page Image Contents