June 2010
FMT700
Shielded Category 6A Jack
Use these instructions to terminate your shielded Category 6A jacks.
What’s Included
Your package should contain the following items. If anything is missing or damaged, contact Black Box Technical Support at
•Shielded Category 6A Jack
•Stuffer cap
•Cable tie
•This instruction sheet
Terminating the CAT 6A Jack
1.Strip and prepare your CAT 6A shielded bulk cable. Peel back the shielding foil and drain wire. Wrap it around the cable jacket.
2.Remove excess Mylar® wrapping around the twisted pairs.
3.Slide the stuffer cap over the stripped cable just until the stuffer cap touches the beginning of the cable jacket.
To Continue with These Instructions, Turn This Page Over…
Customer
Support
Information
Order
call