Unfolding the Stroller
•Keep children away from stroller while unfolding.
•Position the stroller with the handle bar closest to you.
•Release the locking latch located on the right side by lifting the lever off of the extended rivet. See Figure 2.
•Lift up slightly on the handle of the stroller. Then place one foot onto the rear platform and pull up and back on the handle until both side frame bars snap into their locking positions in the frame.
•Lock the safety latch on the lower left side of the stroller by pushing the lever down over the extended rivet. See Figure 3.
•Ensure that the stroller is completely opened and the safety latch is secured before ANY use of the stroller.
Figure 2 | Figure 3 |
!WARNING
ALWAYS secure the safety latch on the side of the stroller when it is in the unfolded use position. This will prevent collapse of the stroller should the handle trigger locks be accidentally opened.
Installing the Front Wheels
•Take one of the double wheel sets and locate the small hole in the rotating bracket that is inside the red lever.
•Push the front axle into this hole and keep pushing the wheel set onto this axle until you hear an audible click. See Figure 4.
•Pull downward on the wheel set to ensure that it has locked into position on the axle.
•Repeat this same procedure for the other wheel set.
•When assembled properly, both wheel Figure 4 sets should rotate and roll smoothly.
Page | Caboose Ultralight Instruction Manual |