Cuisinart SG2-DRT-3X operation manual Illustrates the ICS board

Page 8

8STARLINE

To use the SG2-DRT-3X, the SG2000 must be equipped with the ICS plug-in board. The circuitry on this assembly contains 9 dB of attenuation to ensure proper levels into the transmitter input.

Figure 8 illustrates the ICS board:

Figure 8

SG2 ICS board

SG2-DRT-3X Installation Sheet

Image 8

Contents Related Documentation Document Conventions Before You BeginIllustrates a block diagram of the SG2-DRT-3X Installing the SG2-DRT-3X in the SG2440 Node DescriptionIllustrates the SG2440-DR-3X return board SG2440 lid Illustrates a properly installed and cabled SG2-DRT-3X Installing the SG2-DRT-3X in the SG2000 Node Illustrates the ICS board SG2000 optical transmitter B and a locations SG2-DRT-3X installed in SG2000 STARLINE11 Specifications SG2-DRT-3X Dwdm ModelsSG2-DRT-3X Cwdm Models If You Need HelpFCC Compliance FCC Declaration of Conformity Mgbi