ASSEMBLY
B
A
12 | SIDE VIEW |
|
•First, “snap” the front of the seat to the vehicle A .
•Next, “snap” the four tabs near the back of the seat into the matching slots in the vehicle B .
|
|
|
|
|
|
|
|
|
|
|
|
13 |
| LOCKED |
| UNLOCKED | |
|
|
|
| ||
|
|
|
|
|
|
•Using a slotted screwdriver, turn both lock fasteners a ¼ turn to the locked position .
Handle
Latch
14BACK VIEW
Note: Be sure the end of the handle is clean and free from debris before inserting.
•Make sure the front wheels are not turned.
•Locate the latch on the back end of the vehicle.
•Press the tab and slide the latch to open.
•Insert the handle, as shown, and release the tab.
IMPORTANT! If the latch closes, the handle is properly inserted. If it does not, remove the handle and repeat this step.
10 |