Fisher-Price V3299 owner manual Battery Installation, Battery Connector

BATTERY INSTALLATION

IMPORTANT! Use only a Power Wheels® 6 volt	Battery Connector
(4.0 Amp/Hr) rechargeable battery. Use of any other	Battery Retainer
battery will damage your vehicle.

1 LOCKED UNLOCKED

•Locate the lock fasteners on the front edge of the seat.

•Using a slotted screwdriver, turn both lock fasteners a ¼ turn to the unlocked position .

2

•Grasp under the front of the seat and lift firmly to remove it.

3

•Remove the #8-18 x ⅞" screw from the battery retainer. Lift to remove the battery retainer from the vehicle.

•Place the Power Wheels® 6 Volt (4.0 Amp/Hr.) battery in the battery compartment. Make sure the battery connector extends toward the rear of the vehicle.

•Replace the battery retainer over the battery. Insert the #8-18 x ⅞" screw through the battery retainer and into the vehicle. Tighten the screw.

4

•Plug the battery connector into the motor harness connector.

Note: If the battery connector will not plug into the motor harness connector, turn it over and try again! Do not force the battery connector into the motor harness connector.

•Re-assemble the seat to the vehicle. Using a slotted screwdiver, turn the lock fasteners a ¼ turn to the locked position .

IMPORTANT! Always remember to keep the lock fasteners locked at all times to prevent children from accessing the battery.

V3299pr-0920 12