12ASSEMBLING AND PREPARING
Mounting on a Wall
An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV.
Install the wall mount bracket on a solid wall perpendicular to the floor. If you are attaching the TV to other building materials, please contact qualified personnel to install the wall mount. Detailed instructions will be included with the wall mount. We recommend that you use an LG brand wall mount. When you do not use LG’s wall mount bracket, please use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices.
ENGLISH | 10 cm | |
(4 inches) | ||
| ||
| 10 cm | |
| 10 cm | |
| 10 cm |
Make sure to use screws and wall mounts that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.
Model | 22LY560M | 28LY560M |
VESA (A x B) |
|
|
A | 75 x 75 | 100 x 100 |
B |
|
|
Standard screw | M4 | M4 |
Number of screws | 4 | 4 |
Wall mount bracket | LSW140 | LSW140 |
(optional) |
|
|
Model | 32LY560M | 42LY560M |
VESA (A x B) |
|
|
A | 200 x 200 | 400 x 400 |
B |
|
|
Standard screw | M6 | M6 |
Number of screws | 4 | 4 |
Wall mount bracket | LSW240B | LSW440B |
(optional) | MSW240 | MSW240 |
CAUTION
••Disconnect the power before moving or installing the TV. Otherwise electric shock may occur.
••If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel. When using a
••Do not over tighten the screws as this may cause damage to the TV and void your warranty.
••Use the screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.
••Screw length from outer surface of back cover should be under 8 mm.
(For 22/28LY560M)
Wall Mount Pad
Back Cover
Wall Mount Pad 
Back Cover 
Standard screw 
: M4 x L10
Max. 8 mm