Maxi-Cosi 4358-4583 manual Attach Backrest to Seat Base, Raise Backrest, To Adjust the Headrest

Page 5

4358-4583 US Rodi XR 8/26/08 11:41 AM Page 9

7

Preparing the Child Restraint

1 Attach Backrest to Seat Base

Place seat base close to an edge of a table. Pull back the flap cover to expose the backrest connection holes.

Align the backrest hooks with the holes on the base. The backrest will need to be below the seat base. Rotate the backrest down and insert the hooks into the seat base. Make sure the cover does not get caught between the moving parts.

2 Raise Backrest

Rotate the backrest up until it locks into place.

NOTE: The hooks on the side of the backrest lock into the arms of the seat base.

Headrest Adjustment

8

1 To Adjust the Headrest

This child restraint has 8 headrest positions.

2 To Raise or Lower Headrest

Squeeze the headrest adjustment handle to raise or lower the headrest to the desired position. Release the headrest adjustment handle.

Pull up and down on the headrest to make sure it is locked.

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Merchandise Total Replacement Parts ListAircraft Installation Table of ContentsGeneral and Warm Weather Use Registration and Recall InformationNever place a child less than one-year old forward-facing Child Restraint Parts Back Attach Backrest to Seat Base To Adjust the HeadrestRaise Backrest To Raise or Lower HeadrestTo Recline To Adjust the Shoulder SupportInstall Cup Holder Know Your Vehicle Belts Booster with BackrestBooster without Backrest Secure Shoulder Belt Place Child Child RestraintBuckle Child Remove Backrest Lower BackrestRelease Elastic Straps on Seat Base Pull Pad Off Seat BaseRelease Elastic Straps on Backrest Release Fastening Strip Pull Pad Off BackrestPull Pad Off Headrest Replace the Seat PadWarranty
Top Page Image Contents