Panasonic DMW-YAGHPP owner manual Names and Functions of Components

Names and Functions of Components (continued)

9TC IN terminal (BNC) Timecodes are input here.

Input a reference timecode to this terminal to synchronize the digital camera’s timecode to that of external equipment. yyUse a 5C-FB equivalent double-shielded

cable to connect to this terminal.

10SDI OUT [1, 2, 3, 4] terminals (BNC) Terminals reserved for SDI output.

Resolution setting	Output
	terminal
C4K, 4K	1 to 4
<1.5G-SDI Square Division>
FHD (1080/59.94p, 1080/50p)	1, 2
<3G-SDI>	(same signal)
FHD (Other than the above), HD	1 to 4
<1.5G-SDI>	(same signal)

yyUse a 5C-FB equivalent double-shielded cable to connect to this terminal.

yyWhen outputting videos that do not include timecodes (e.g., when [Rec Format] is set to [MP4] on the digital camera), a timecode will not be output.

11AUDIO IN [CH1, CH2] terminals (XLR, 3-pin)

Connects to audio equipment or microphones.

PUSH	Pin no.	Signal
	1	GND
2 1	2	AUDIO IN (H)
3	3	AUDIO IN (C)

12LINE / MIC / +48V switches Switch these based on the audio equipment connected to the AUDIO IN CH1 or AUDIO IN CH2 terminal.

LINE:

When line input audio equipment is connected. (Input level: 0 dBu)

MIC:

When an external microphone is connected.

(Input level: -50 dBu)

+48V:

When a phantom microphone (a microphone that requires a +48 V power supply) is connected.

A power supply of +48 V will be provided to the AUDIO IN CH1 and AUDIO IN CH2 terminals.

13STEREO / MONO switch

Switches the audio that is input to the AUDIO IN CH1 and AUDIO IN CH2 terminals to stereo or monaural audio.

STEREO:

Two-channel stereo audio.

MONO:

Monaural audio.

The audio that is input to the AUDIO IN CH1 terminal will also be input to

AUDIO IN CH2.

14REC LEVEL dials

Adjust the audio inputs to the AUDIO IN CH1 and AUDIO IN CH2 terminals individually.

15Level meters

Display individual indicators for the audio input levels of the AUDIO IN CH1 and AUDIO IN CH2 terminals.

The indicators light red when the audio levels exceed 0 dB.

Adjust the REC LEVEL dials (14) to prevent the audio levels from exceeding 0 dB.

16Power indicator

Lights when the connected digital camera is turned on.

17Tripod attachment holes

Compatible with 1/4-20 UNC and 3/8-16 UNC screws.

Use the appropriate hole according to the diameter of the tripod screw.

yyThe holes have a depth of 5.5 mm. When attaching a tripod to the unit, do not tighten the screw with excessive force.

18Intake vent

19Exhaust vent

(ENG) VQT5K48 9