Troubleshooting
Follow the procedures described below. If you are not able to solve the problem, contact your dealer.
Power source
Problem | Cause and Remedy | Page |
The power is not on. | • Are the power cord and AC adaptor connected |
|
| correctly? |
|
| ⇒Connect the power cord and AC adaptor correctly. | 18 |
The power is not off. | • Press the POWER button for approximately 1 second. | 22 |
| • When the printer is in sleep mode or when the screen |
|
| saver is displayed on the LCD monitor, the power is not |
|
| turned off, even if the POWER button has been pressed. |
|
| ⇒Now that sleep mode is off, press the POWER button | 38 |
| again for approximately 1 second. |
|
|
|
|
LCD monitor
Problem | Cause and Remedy | Page |
The LCD monitor is | • The LCD monitor is automatically turned off if the printer |
|
turned off although | has not been used for the time selected under [Sleep] |
|
the printer is turned | on [Settings]. |
|
on. | ⇒Press any button to resume operations. 1 | 38 |
Some pixels are | • This is not a malfunction. These pixels do not affect | 10 |
inactive or always lit | printing. |
|
on the LCD monitor. |
|
|
Noise appears on | • In dark places, noise may appear to maintain the | — |
the LCD monitor. | brightness of the LCD monitor. This does not affect |
|
| printing. |
|
1 To resume with the POWER button, press the POWER button for approximately 1 second.
Others
Continued on next page
61