Getting Started
Connecting the Power
1. Connect one end of
the AC adapter | Battery | |
to the camera’s | ||
status | ||
power connector | ||
and the other | Link | |
status | ||
end to a standard | ||
120 volt AC | Power | |
outlet. | status | |
|
2.Press the Power button on the camera; the Power status light should turn on. If it doesn’t, try reconnecting the AC adapter, and make sure the power outlet isn’t controlled by a wall switch.
Antenna Lens
POWER
LINK
Power connector
Stand
Charging the Batteries
The batteries in your camera will charge whenever the power is connected. Let the batteries charge completely (about 8 hours) before you unplug the camera to move it around. (You can still use the camera: just keep it plugged in.)