Uniden UDWC23 user manual Mounting Camera screw brace Post Lock Screw holes

Page 6

Mounting

Camera screw brace

Mounting

post

Post

lock

Screw holes

1.Hold the base of the mount where you want to attach it, and mark the location of the screw holes.

2.Use the included screws and anchors to attach the base to the wall or ceiling.

3.Attach the camera to the mounting screw. Tighten it a few turns, then turn it to the direction you want.

4.Tighten the camera brace up against the back of the camera to secure it into place.

5.Unlock the mounting post by turning the wingnut to the left a few turns.

. Set the mounting post to the correct angle, then tighten the wingnut until the post is locked into place.

 

Tighten the brace against

1

Attach the camera

2

to the mounting

the camera to

 

screw and turn it

 

secure it

 

to the desired

 

in place.

 

direction.

3

 

 

 

Loosen the

 

 

wingnut to

 

Adjust the post to

unlock the

4

mounting

the correct angle,

post.

 

 

then tighten the

 

 

 

wingnut to lock the

 

 

 

post into place.



Image 6
Contents What’s in the Box If You Contact Uniden’s Phone NumberImportant Safety Instructions Contents Connecting the Power Getting StartedCharging the Batteries Button What it does Using the Camera MountLearning the Buttons and Lights Light State What it meansMounting Camera screw brace Post Lock Screw holes Pairing the Camera TryCamera Specifications Product SpecificationsImage Specification Additional InformationPolymer-Lithium Battery Warning Recycling and Disposal InformationFCC Compliance Information Part 15 Compliance StatementRF Exposure Information CE Compliance Information One-year Limited WarrantyIC Compliance Information Radio Equipment NoticeAmon Carter Blvd. Fort Worth, TX