Installation Guide

■STH-160PO (Outdoor Housing), STH-160PI (Indoor Housing)

STH-160PI is the same as STH-160PO except for the fan and heater.

1.With STB-270PW, the wall mounted bracket, fix the bracket to the intended location using four screws.

Cautions

·Pull the connection cable out of the bracket through the hole in advance.

	2. Connect cables to the video cable terminal and controller	Video Cable
	cable terminal on the circuit board of the mounting bracket.
		Controller Cable

Power Cable

3. Connect the power cable for the fan heater (Outdoor Housing).

Mounting Bracket

Power Adapter Cable

4.Fix the mounting bracket and housing using three screws.

5.Fix the housing to the wall mounted bracket using three

screws.

Cautions

·For fixing the circuit board, match the lock screw part with the direction of the housing sticker.

6.Fit and turn the Speed Dome Camera into the slot, locating it in the direction marked on the mounting bracket, and fix it using the rotation control screw.

7.Connect the circuit board to the connector of the Speed Dome Camera as shown in the figure.

Cautions

·When using the outdoor or indoor housing, remove the dome cover of the Speed Dome Camera for clearer images.

8. Fix the external cover to the housing using four screws.

6 SPEED DOME CAMERA ACCESSORIES

SPEED DOME CAMERA ACCESSORIES