Installation Guide
4.Fasten the eye bolt on the housing and fix the housing to the ceiling, using the cable to prevent it from falling.
5.Fix the housing to the ceiling using three screws.
6. Fit and turn the Speed Dome Camera into the slot, locating it in the direction marked on the mounting bracket, and fix it using the rotation control screw.
7.Connect the mounting bracket to the connector of the Speed Dome Camera as shown in the figure.
8. Fix the external cover to the housing using three screws.
Component Name
■Wall Mounting
FAN
WALL BRACKET
BRACKET HEATER 
PLATE FIX DOME
RUBBER GASKET | HOUSING OUTDOOR |
| |
DOME COVER |
|
| HOUSING OUTDOOR SHIELD |
RING DECORATION |
|
| BRACKET P.C.B |
■ Ceiling Mounting | ■ Embedded Mounting | |
| CEILING PLATE | |
FAN | HOUSING IN CEILING | |
| ||
| CEILING PIPE | |
BRACKET HEATER |
| |
PLATE FIX DOME | CEILING FLANGE | |
| ||
RUBBER GASKET | RING DECORATION | |
(INCEILING TYPE) | ||
| ||
DOME COVER | HOUSING OUT DOOR | |
| ||
RING DECORATION | HOUSING OUT DOOR SHIELD | |
| ||
| BRACKET P.C.B |
10 | SPEED DOME CAMERA ACCESSORIES | SPEED DOME CAMERA ACCESSORIES | 11 |
|
|
|
|