Bushnell 119425C2, 119426C instruction manual On Mode, Setup Mode

Page 11

in the OFF mode the Trophy Cam still consumes power at a very low level. Therefore, it’s a good idea to take the batteries out of the battery compartment if the camera will not be used for a long time.

ON Mode

Anytime after the batteries and SD card have been inserted, you can switch on the camera. When the power switch is moved to the top position, the camera will enter into the ON (Live) mode. The motion indicator LED (pg. 7, “Front View”) will blink red for about 10 seconds. This interval allows time for you to close the Trophy Cam’s front cover, lock it, and leave the monitored area. Once in the ON mode, no manual controls are needed or possible (the control keys have no effect). The Trophy Cam will take photos or videos automatically (according to its current parameter settings) when it is triggered by the PIR sensor’s detection of activity in the area it covers.

You can either move the power switch directly from OFF to ON mode, or stop at the SETUP position first to change one or more settings, then move the switch to ON after you have finished doing so.

SETUP Mode

In the SETUP mode you can check and change the settings of the Trophy Cam with the help of its built-in LCD (or a monitor connected to the TV out jack). These settings, found in the SETUP Menu, let you change the photo or video resolution, interval between photos, switch the time imprint on, etc. Moving the power switch to the SETUP position will turn on the LCD display, and you will see an information screen that shows how many images have been taken, the battery level, camera or video mode, etc (see Fig. 3).

NOTE: always move the power switch from OFF to SETUP mode. It is possible that the camera could lockup if it is switched from ON to SETUP mode. If this occurs, simply move the switch to OFF and then push it up to SETUP again.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents
Trophy CAM Page Table of Contents Table of Contents Important Note Your Trophy Cam to obtain maximum battery lifeApplications Parts and ControlsAbout the Trophy CAM PIR Sensor TV Out USB Port Loading Batteries Installing the Batteries and SD CardUsing an External Power Source optional, user provided Inserting the SD Card OFF Mode Menu Parameter Settings for detailsSetup Mode On ModeSetup Mode Shortcut Keys/Functions Setup Information ScreenChanging Parameter Settings in Setup Mode Using the Setup Menu to Change SettingsPress Menu Press Down Press OK How Parameter Settings Are DisplayedPage Field Scan Feature Interval 15M Field Scan On StartStill photos Interval parameter Parameter Settings DescriptionOnly affects Still photosIncrements Settings start over at 60M Bold=default IntervalSet Clock Bold=default FormatTV Out Time StampDefault Set Bold=default Field ScanMounting Mounting and Positioning the Trophy CAMSensing Angle and Distance Test Switching on the CameraReviewing Images on an External Video Monitor Playing BACK/DELETING the PHOTOS/VIDEOSDeleting Photos/ Video Files Cable from TV Out Switch to Setup mode if you aren’t already in it. Press OKReviewing Images Directly From the SD Card Reviewing Images by Connecting the Camera to a ComputerDownloading the PHOTOS/VIDEOS Camera stops taking images or won’t take images Battery life is shorter than expectedDaytime photos or videos appear too dark Camera won’t power upStill Photo and/or Video Quality Problems Night photos or videos appear too darkRed , green or blue color cast Night photos or videos appear too brightDaytime photos or videos appear too bright Photos with streaked subjectCamera won’t retain settings LCD Screen IssuesLCD screen powers on but no text is present Screen comes on but then powers offMoisture or Ants Inside Camera Camera takes continuous images of no subjectTechnical Specifications TWO-YEAR Limited Warranty FCC Compliance Statement Bushnell Outdoor Products
Top Page Image Contents