Sony MVC-CD350 operating instructions Disc

Symptom	Cause	Solution
The image cannot be	• The disc has not been finalized.	p Finalize the disc (page 75).
played back through the	• Vibration caused an error during recording.	p You may be able to view the image if you connect the camera to
CD-ROM drive of your		your computer with the USB cable.
computer.	• The CD-ROM drive does not support the packet-	p Consult the computer or the CD-ROM drive manufacturer.
	write system.
	• The CD-ROM drive does not support the	p Consult the computer or the CD-ROM drive manufacturer.
	MultiRead.
	• The disc may be scratched or dirty.	p Clean the disc if the disc is dirty. When the disc is scratched
		replace the disc.
	—	p Causes not described above have occurred, consult the
		computer or software manufacturer.
The image and sound are	• You are playing back the file directly from the	p Copy the file to the hard disk of your computer and then play
interrupted by noise when	disc.	back the file from the hard disk.
you view a movie on a
computer.
You cannot print an	—	p Check the printer settings.
image.	—	p Click on HELP for the “ImageMixer Ver. 1.5 for Sony”
		application software.
An error message appears	• The computer display is not set correctly.	p Set the computer display as follows:
when you set the supplied		Windows: 800 × 600 dots or more
CD-ROM in your		High Color (16 bits, 65,000 colors) or more
computer.		Macintosh: 800 × 600 dots or more
		32,000-color or more

Disc

Symptom	Cause	Solution
You cannot record on a	• The disc is full.	p Replace it with a new one. Format the disc when using a CD-
disc.		RW.
	• The disc is not initialized.	p Initialize the disc (page 19).
	• The disc is not placed correctly.	p Place the disc correctly in the disc tray (page 18).

94