Camera Operation 
Select any function you | Modes can be |
wish to operate by | changed using the |
using the UP and | LEFT and RIGHT |
DOWN buttons. | buttons. |
3.Please press the LEFT or RIGHT button if you wish to change mode.
•When the LEFT or RIGHT button is pressed, available values and modes are displayed in order. Please keep pressing the button until you get to the mode you wish to operate.
4.Please select 'EXIT' and then press the SETUP button to finish the setting.
Note
•If 
appears at the mode you wish to operate, it means that there is a sub- menu which can be selected by pressing the SETUP button.
•If 
appears at the mode item, it means that there is no mode available to be selected.
LENS (selection)
This function is used to adjust the brightness of the screen.
1.When the SETUP menu is displayed on the screen, please position the arrow to point to 'LENS' by using the UP and DOWN buttons.
2.Please select the type of the lens you wish to use by pressing the LEFT or RIGHT button.
DC/VIDEO : Auto iris lens selection
Note
•When using an auto iris lens, the setting of the auto iris lens selection switch, located on the back of the camera, must be on DC or VIDEO depending on the type of the lens which is being used. (Please refer to the picture on page 15)
•The brightness of the screen can be adjusted in DC mode. The brightness can be adjusted within the range of 1 ~ 70. The optimum level of brightness for the user can be achieved by adjustment.
MANUAL : Manual lens selection
3. Please press the SETUP button if you wish to return to the previous menu.
COLOR CCD CAMERA 22 User’s Manual | COLOR CCD CAMERA 23 User’s Manual |