Sony SDC-415 SERIES Connecting to a monitor, Connecting to power, AC Power Type AC 24V, 300mA

Page 10

Installation

Connecting to a monitor

Please connect the video output terminal located on the back of the camera to the monitor.

CCD Camera

Monitor

The connection method varies depending on the type of monitor and accessories. Please refer to the user's manual for each instrument.

Please turn off the power when connecting.

Please select Hi-Z on the 75/Hi-Z switch for the intermediate video TV set and select 75for the Intermediate device as shown in the picture below.

CCD Camera

Intermediate

End monitor

Connecting to power

Each model has a different power input specification.

Please check the model type and standard power requirement before connecting to power.

AC Power Type (AC 24V, 300mA)

Use AC24V, 300mA adaptor

For SDC-415NA/SDC-415PA.

DC Power Type (DC 12V, 500mA)

Use DC12V, 500mA adaptor

For SDC-415ND/SDC-415PD.

High Voltage Type (AC230V, 50/60HZ)

Use AC230V, 50/60Hz power source

For SDC-415PH.

When the resistance value of copper wire is at [20°C(68°F)]

Copper wire size(AWG)

#24(0.22mm2)

#22(0.33mm2) #20(0.52mm2)

#18(0.83mm2)

Resistance value(/m)

0.078

0.050

0.030

0.018

Voltage drop(V/m)

0.028

0.018

0.011

0.006

 

 

 

 

 

As shown in the table above, voltage decreases as the wire gets longer.

Therefore use of an excessively long adaptor output line for connection to the camera

may affect the performance of the camera.

Standard voltage for camera operation : DC 12V±10%

There may be some deviation in voltage drop depending on the type of wire and the manufacturer.

COLOR CCD CAMERA 18 User’s Manual

COLOR CCD CAMERA 19 User’s Manual

Image 10
Contents About this manual Sales NetworkCorrect Disposal of This Product Contents Features Camera needs periodic maintenancePrecautions Front ComponentsNames and Functions of Parts Auto iris lens connection plug Mount adaptorSide Bottom Auto iris lens connectorMounting bracket screw hole Back InstallationWhen using an auto iris lens LensPin No When using a C-Mount lensWhen using a CS-Mount lens LensAC Power Type AC 24V, 300mA Connecting to a monitorConnecting to power DC Power Type DC 12V, 500mACamera Operation SettingsMenu Lens selection Manual Manual lens selectionShutter condition and speed control White Balance controlAGC Auto Gain Control Backlight Backlight CompensationHIGH/MIDDLE/LOW Ssnr Samsung Super Noise reduction Sens UP Low illuminanceSpecial If the wrong name has been inputColor Electronic DAY & Night Motion Detection MirrorProblems Troubleshooting TroubleshootingColor DAY & Night Specifications White BalanceMemo