∙Then it will show the CURRENT VERSION of the firmware.
(sample image)
∙At „Version“, you will find a menu, where you need to select „Update“. „Access“ will be shown on a black screen again.
(sample images)
∙If an error is shown at this step or during the rest of the updating-process, please refer to the section „problems that may occur“ in this document.
∙Check and compare the version-numbers that are shown. If the NEW VERSION number is higher than the CURRENT VERSION number, select OK. Else select CANCEL and stop the procedure, for you already have the latest version installed on your camera, or you did not download the latest version from the website.
(sample image)
∙Select OK again to proceed
4
