Sony DSC-T1 warranty

Page 5

(sample image)

∙As the firmware update is executed, you will see three circle signs. The circle signs will begin to blink and then turn on one-by-one. Once all three circles are lit, the update is finished. The text „Finished – Turn off and on again“ appears on the screen.

(sample image)

<signs blinking>

Start

1/3 finished

2/3 finished

∙Turn the camera off.

(sample image)

Please push the “RESET” button by some sharp-pointed stuff, then set data mentioned below again before you check the firmware version number, because after pushing the reset button those data are initialised.

Volume, Beep, Metering Mode, White Balance, ISO, Picture Effect,

Sharpness, Saturation, Contrast, Scene Selection, EV, AF Range Finder Frame, Multi Burst Shutter Interval, AF Mode, Digital Zoom, AF Illuminator,

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents What you need PC with Memory Stick slot or Memory Stick adapterPC with USB plug only via the supplied cradle station How you proceed Download the firmware update file to your PCInstall the firmware update file on your camera Page Page Check the firmware version in your camera ∙ Error 20 No software file∙ Error 40 Invalid file ∙ Error 30 Format Memory Stick Duo media before useSample Ima ge Possible problems during re-updating
Top Page Image Contents